SwiftTools

Asphalt Calculator

A 20 by 40 foot driveway at 3 inches compacted needs 14.5 tons of hot-mix asphalt — order 16 tons with 10% waste. Enter your driveway below for your exact tonnage.

Your driveway or pad
tons = area (sq ft) x thickness (in) / 12 x density (lb per cu ft) / 2,000 · shortcut: tons = area x thickness x 0.0031 · cubic yards = cubic feet / 27 · truck loads = ceil(tons / 20) · 1 ton covers ~55 sq ft at 3 in

Hot mix only — this counts the asphalt mat, not the stone base underneath (about 1.4 tons per cubic yard, see the Gravel Calculator), excavation, geotextile, tack coat, milling or sealcoat. Use the finished compacted thickness, not the loose depth: mass is conserved when the mat is rolled, so no compaction factor is added. Asphalt trucks carry 20 to 25 tons, so small jobs round up to a full load and you pay for the trip regardless. Confirm quantities with your supplier and local code before ordering.

How the asphalt calculator works

Asphalt is sold by the ton, not the cubic yard, so the calculation converts your paved area into weight: tons = area (sq ft) x thickness (in) / 12 x density (lb per cu ft) / 2,000. The standard compacted density for dense-graded hot mix is about 145 lb per cubic foot (142 to 148 in place), which is why the field shortcut works: tons = area x thickness x 0.0031. The common field rule of 110 lb per square yard per inch of thickness equals about 147 lb per cubic foot — the same figure, another way. Use the finished compacted thickness, not the loose depth: mass is conserved when the mat is rolled, so no compaction factor is added on top.

Worked example: a 20 by 40 foot driveway (800 sq ft) at 3 inches compacted is 800 x 0.25 = 200 cubic feet, or 7.41 cubic yards. At 145 lb per cubic foot that is 29,000 lb, or 14.5 tons net — 16 tons with a 10% waste and edge allowance. A 50 by 20 foot driveway at 3 inches needs 18.1 tons, or about 19.6 with waste. A 40 by 12 foot driveway paved 3 inches thick needs 4.67 cubic yards, or about 9.14 tons including 5% waste. One ton of asphalt covers about 83 sq ft at 2 inches thick, 55 sq ft at 3 inches, or 41 sq ft at 4 inches.

Common mistakes: pricing by the cubic yard instead of the ton (plants sell hot mix by the ton, so a yard-based order can arrive short); using the loose depth instead of the compacted depth; and forgetting the base — a new residential driveway needs 3 to 4 inches of compacted asphalt over 6 to 8 inches of compacted crusher run, with geotextile under the stone on clay, and an overlay on sound pavement is 1.5 to 2 inches. Trucks carry 20 to 25 tons, so a 16-ton job is one load and a 30-ton job is two. For the installed price per square foot, use the Asphalt Cost Calculator; for the sealcoat on top, the Driveway Sealcoating Cost Calculator.

tons = area (sq ft) x thickness (in) / 12 x density (lb per cu ft) / 2,000 · shortcut: tons = area x thickness x 0.0031 · 145 lb per cu ft standard · 1 ton covers ~55 sq ft at 3 in, ~83 sq ft at 2 in

Related tools

Also try the Asphalt Cost Calculator for the installed price, the Driveway Sealcoating Cost Calculator for the sealcoat, and the Gravel Calculator for the stone base underneath.

Asphalt calculator FAQ

How many tons of asphalt do I need for a driveway?

Multiply length x width in feet x thickness in inches / 12 to get cubic feet, add 5 to 10% for waste, then multiply by about 145 lb per cubic foot and divide by 2,000. A 20 by 40 foot driveway at 3 inches needs 14.5 tons net, or 16 tons with 10% waste.

How much asphalt is 1 ton?

One ton of asphalt covers approximately 110 sq ft at 1.5 inches thick, 83 sq ft at 2 inches, 55 sq ft at 3 inches, or 41 sq ft at 4 inches. A ton is about 0.51 cubic yards at 145 lb per cubic foot.

How thick should a residential asphalt driveway be?

Trade guidance for a residential driveway is 2 to 3 inches of compacted asphalt over a compacted aggregate base, commonly 6 to 8 inches. Use 3 to 4 inches if heavy trucks use it. An overlay on sound pavement is 1.5 to 2 inches.

How many tons of asphalt fit in a truck?

A tandem dump carries about 15 tons and a tri-axle 20 to 22 tons; a typical asphalt truck load is 20 to 25 tons. Small jobs round up to a full load and you pay for the trip regardless.

What is the density of asphalt?

Compacted hot-mix asphalt weighs about 145 lb per cubic foot, or roughly 2 tons per cubic yard. The Asphalt Institute gives 142 to 148 lb per cubic foot in place. Ask the plant for its mix figure.

Do I need a base under asphalt?

Yes. A new residential driveway needs 6 to 8 inches of compacted crusher run under the asphalt, with geotextile under the stone on clay. The base tonnage is usually larger than the asphalt tonnage — about 1.4 tons per cubic yard of stone.

How much does a ton of asphalt cost?

Hot-mix asphalt typically costs $90 to $160 per ton at the plant in 2026, plus a fuel surcharge. The figure here is material only — the Asphalt Cost Calculator gives the installed price per square foot.