Carpet Square Yard Calculator
Carpet is sold by the square yard: a 15×12 ft room is 180 sq ft, which is exactly 20 square yards — and about 22 sq yd once you add the standard 10% for seams and cuts. Enter your room size to get square feet, net and order square yards, seam count on standard 12 ft rolls, and the material cost.
Carpet is sold by the square yard in the U.S. (9 sq ft = 1 sq yd) but manufactured on 12 ft wide rolls — a room wider than 12 ft always needs a seam, and patterned carpet needs extra for pattern matching.
Measure to the back of closets and through doorways. Installers carpet closets from the same roll; excluding them understates the order.
How the carpet square yard calculator works
The conversion itself is one step: square yards = square feet ÷ 9, because a square yard is a 3 ft × 3 ft square. A 15×12 room is 180 sq ft ÷ 9 = 20 sq yd. Where orders go wrong is everything after the division — seams, roll width, and waste.
Carpet comes on rolls 12 ft wide (some styles 13.5 or 15 ft). Any room wider than the roll needs two or more pieces seamed together, and seamed pieces must all run the same pile direction. The calculator counts the seams your width implies and folds a waste percentage — 10% standard, 15–20% for patterns that must match — into the order quantity.
Pricing follows the order quantity, not the room: at $35/sq yd the 20 sq yd room costs about $770 in carpet once waste is in. Padding (about $5–$10/sq yd) and installation (about $10–$20/sq yd) are quoted on the same square-yard figure, which is why comparing quotes in sq yd keeps every line honest.
sq yd = (length × width × rooms) ÷ 9 · order = sq yd × (1 + waste) · seams = floor(room width ÷ 12) per room when width > 12 ft
Related tools
Budgeting the whole job? Add removal with the Carpet Removal Cost Calculator, or compare hard floors with the Laminate Flooring Cost Calculator and Hardwood Flooring Cost Per Square Foot Calculator.
Carpet square yard calculator FAQ
How do I convert square feet to square yards for carpet?
Divide square feet by 9. A 12×12 room is 144 sq ft ÷ 9 = 16 sq yd. Then add waste — about 10% for plain carpet, 15–20% for patterns — because the roll width and seams mean you cannot use every inch you buy. The calculator does both steps for you.
How many square yards of carpet do I need for a 15×12 room?
Twenty square yards net (180 sq ft ÷ 9), and about 22 sq yd to order with the standard 10% waste allowance. At a typical $30–$45 per sq yd for mid-range carpet, that is roughly $660–$990 in material before padding and installation.
Why does carpet come in square yards but rooms are measured in feet?
History and manufacturing. Carpet mills weave on wide looms and the trade standardized on square yards a century ago; rooms are still taped in feet. Every quote converts ÷9 somewhere — doing it yourself first, as this calculator does, is the easiest way to catch a padded quote.
How wide is a roll of carpet?
Twelve feet is the standard U.S. roll width; some lines come 13 ft 6 in or 15 ft wide. Rooms narrower than the roll can be done in one seamless piece. Wider rooms need seams — a 16 ft wide room from a 12 ft roll gets one seam where a 12 ft piece meets a 4 ft fill piece.
How much extra carpet should I order for waste?
Ten percent for plain, unpatterned carpet in rectangular rooms. Fifteen percent for rooms with closets, angles, or stairs. Twenty percent for patterned carpet, because the pattern repeat forces extra length at every seam so the design lines up.
Does the square yard price include padding and installation?
Usually not. The advertised $/sq yd is carpet only. Padding adds roughly $5–$10/sq yd and installation $10–$20/sq yd, plus extras for stairs, tear-out, and furniture moving. A $35 carpet commonly becomes a $55–$65/sq yd finished job — compare quotes on the finished per-yard total.
How do I measure an L-shaped room for carpet?
Split it into two rectangles, calculate each one, and add them — or use the room fields here twice and add the results. Keep both pieces running the same pile direction in your notes; installers need that to plan the roll cuts, and reversing a piece visibly changes its shade.