Firewood for Winter Calculator
Enter your heated area, climate and how you use wood heat, and this firewood calculator returns the cords you need for the winter — plus face cords, stack volume and cost — so you can order once and not run out in January.
Planning estimate for a wood stove (about 70% efficient) with average insulation. An open fireplace is only 10 to 15% efficient and can burn roughly five times the wood for the same heat — add about 50% if a fireplace is your only heat. Order in spring or summer so the wood has 6 to 12 months to season. One full cord is 128 cubic feet.
How the firewood for winter calculator works
The rule of thumb the industry uses is cords per 1,000 square feet of heated space: 2 to 3 cords in a cold climate, 1 to 2 in a mild one, with moderate climates in between. Multiply that rate by your heated area and by how you use the wood — full value for primary heat, about 0.4 for supplemental heat alongside a furnace, about 0.2 for occasional evening and weekend fires. The result is full cords of seasoned hardwood, each 128 cubic feet.
Worked example: a 1,500 sq ft home in a cold climate using wood as its primary heat needs 1.5 times 2.5, or 3.75 cords for the winter — so order 4 full cords. That is 11.25 face cords, a 480 cubic foot stack and roughly 2,625 split pieces, costing about $1,313 at $350 per cord. The same house using wood only as a supplement needs 1.5 cords.
Common mistakes: counting total floor area instead of heated area (an unheated garage burns no wood); ordering face cords thinking they are full cords (three face cords equal one full cord at 16-inch logs); and ordering in November — firewood needs 6 to 12 months to season, so buy in spring or summer. An open fireplace is only 10 to 15% efficient against about 72% for an EPA-certified stove, so if a fireplace is your only heat, add roughly 50% to the estimate. The Cord of Wood Calculator checks a delivered stack against what you paid for.
cords = (heated sq ft / 1,000) x climate factor x use factor · climate: cold 2.5, moderate 2.0, mild 1.5 · use: primary 1.0, supplemental 0.4, occasional 0.2 · face cords = cords x 3 · stack = cords x 128 cu ft
Related tools
Also try the Cord of Wood Calculator to check a delivered stack, the Gravel Calculator for a woodshed base, and the Topsoil Calculator for the yard.
Firewood for winter calculator FAQ
How many cords of firewood do I need for winter?
A 1,500 sq ft home in a cold climate using wood as primary heat needs about 3.75 cords — order 4. Typical primary-heat homes burn 3 to 6 cords a season, depending on size, climate, insulation and stove.
How many cords of wood per 1,000 square feet?
About 2 to 3 cords per 1,000 sq ft in a cold climate and 1 to 2 in a mild climate, for primary heating. Supplemental use is roughly 40% of that.
How much does it cost to heat with wood for a winter?
At $350 per cord, 3.75 cords costs about $1,313. Seasoned hardwood runs $275 to $400 per cord delivered in most regions, so a typical winter runs roughly $800 to $2,400 depending on home size and climate.
How many face cords do I need for winter?
Three face cords equal one full cord at 16-inch logs. A 3.75-cord winter need is 11.25 face cords — always convert to full cords before ordering, since sellers quote both units.
When should I order firewood for winter?
In spring or summer. Firewood needs 6 to 12 months to season (dry) before it burns efficiently; wood ordered in November is usually still green, burns poorly and builds up creosote.
Does stove type change how much wood I need?
Yes — a lot. An EPA-certified stove runs about 72% efficient, while an open fireplace is only 10 to 15% efficient. A high-efficiency stove can cut wood use by 25 to 30% against an older stove.
How much wood does a fireplace use compared to a wood stove?
An open fireplace can burn roughly five times the wood of an EPA stove for the same heat. If a fireplace is your only heat source, add about 50% to this calculator estimate and expect far more frequent loading.