Baseboard Calculator
Enter your room size and doorways, and this baseboard calculator returns the linear feet to install, the boards to buy, and how every stock length compares — because the stick length changes what you buy more than the waste percentage does.
Baseboard only — crown molding is a separate job with its own calculator. Baseboard runs under windows, so do not deduct them; it stops at door casings, so each doorway is deducted. Quarter round or shoe molding, if you use it, is the same linear footage as the baseboard.
How the baseboard calculator works
Baseboard follows every wall and stops at every doorway. Add up the perimeter of the room, subtract about 3 feet per standard doorway — the width baseboard skips where the trim meets the door casing — and add 10% for miter cuts, coped corners and the odd bad cut. Then divide by the board length you plan to buy and round up, because you cannot buy part of a board. The stock length matters: a 14-foot wall from a 16-foot stick leaves a 2-foot offcut that fits nowhere else in the room, while the same wall from 8-foot sticks needs two pieces and a joint in the middle.
Worked example: a 12 by 14 foot room with one doorway has a perimeter of 52 feet, less 3 feet for the door, or 49 linear feet to install. With 10% waste that is 53.9 feet to buy — 54 feet in round numbers. At 16-foot boards that is 4 boards (64 feet purchased, about 31% over the net footage, but with no mid-wall joints); at 12-foot boards it is 5 boards (60 feet); at 8-foot boards it is 7 boards (56 feet, about 14% over, with joints). The comparison is the point: the shortest stock wastes least, the longest leaves the cleanest walls.
Common mistakes: measuring the room but forgetting the doors (each one is 3 feet of baseboard you do not need); deducting windows (baseboard runs under them, so they stay in the count); and buying exactly the net footage with no waste — every corner is a cut, and a miscut board is a trip back to the store. For a whole house before you have measured room by room, baseboard runs at roughly 0.30 linear feet per square foot of floor area, so a 2,000-square-foot home is about 600 linear feet. The Crown Molding Calculator sizes the trim at the ceiling.
perimeter = 2 x (length + width) · net = perimeter - (doorways x door width) · buy = net x (1 + waste%) · boards = ceil(buy / board length)
Related tools
Also try the Crown Molding Calculator for the ceiling trim, the Wallpaper Calculator for the walls above it, and the Paint Calculator for the finish.
Baseboard calculator FAQ
How much baseboard do I need for a 12 x 14 room?
49 linear feet to install with one doorway — 52 feet of perimeter less 3 feet for the door — and about 54 feet to buy with 10% waste. That is 4 boards of 16 feet, 5 of 12 feet, or 7 of 8 feet.
How much baseboard do I subtract per door?
About 3 feet per standard doorway, the width baseboard skips where it meets the door casing. Measure casing to casing if your doors are wider than standard — a 4-foot opening deducts 4 feet.
What waste percentage should I add for baseboard?
10% is the standard allowance for cutting losses, coped corners and the odd bad cut. The stock length you choose changes the real waste more than this percentage: 16-foot boards on a 12 by 14 room waste about 31%, 8-foot boards about 14%.
What board length should I buy?
16-foot boards leave the fewest joints but the most waste; 8-foot boards waste least but put a joint in the middle of most walls; 12-foot boards are the usual compromise. The calculator shows all three so you can pick by what matters to you.
How much baseboard does a whole house need?
Roughly 0.30 linear feet per square foot of floor area — about 600 linear feet for a 2,000-square-foot home. More rooms means more baseboard: the same area needs about 340 linear feet as an open four-room plan and about 470 as a traditional eight-room layout.
Do I need baseboard under windows?
Yes — baseboard runs under windows, so do not deduct them. It only stops at doorways, where the trim meets the door casing.
Do I need quarter round or shoe molding too?
Only if you want it: quarter round or shoe molding covers the gap between the baseboard and the floor, and it takes the same linear footage as the baseboard itself. It is a separate piece, so buy it by the same count.