Tile Grout Calculator
Enter your tile size, joint width, tile thickness and tiled area, and this tile grout calculator returns the grout weight, the bags to buy and the cost — for sanded, unsanded or epoxy grout.
Grout fills only the joints, never the whole floor — tile size decides how much of the area is joint: 6 by 6 inch tiles need about twice the grout of 12 by 12 inch tiles on the same floor. ANSI A108.10 sets a 1/16-inch minimum joint width and requires joints filled full-depth. Sanded grout runs about $16 to $26 per 25 lb bag, unsanded about the same, epoxy kits about $60 to $90. Manufacturer coverage charts differ because products differ — confirm against the chart on the bag you actually buy.
How the tile grout calculator works
Grout fills only the joints between tiles, so the amount depends on tile size, joint width and tile thickness — not just the area. The perimeter-to-area ratio (tile length + tile width) divided by (tile length x tile width) gives the joint length per unit area; multiply by joint width and joint depth for the joint volume, then convert to pounds with the grout density factor K (14.5 for sanded, 12.0 for unsanded). Add 10% waste for mixing loss and spillage — 15% for diagonal layouts, small tiles or a first tiling job — and round bags up, because a part-bag still has to be bought. Epoxy is sold by kit, not by weight: one full unit yields 188.9 cubic inches of grout.
Worked example: 100 square feet of 12 by 12 inch tile, 1/8-inch joints, 3/8-inch thick tile, sanded grout, 10% waste. Grout per square foot is (12 + 12) / (12 x 12) x 0.125 x 0.375 x 14.5 = 0.113 lb. For 100 square feet that is 11.33 lb net, 12.46 lb with waste — one 25 lb bag, costing $22 at $22 a bag. The same floor in 6 by 6 inch tile needs about twice as much: 0.226 lb per square foot, 24.9 lb with waste, still one 25 lb bag but with nothing to spare. A 200-square-foot floor of 24 by 24 inch tile with 3/16-inch joints needs 0.080 lb per square foot, 17.6 lb with waste — again one bag.
Common mistakes: estimating grout from area alone (small tiles have far more joint per square foot), forgetting joint depth (grout fills the joint full-depth per ANSI A108.10, so thickness is the depth), and picking sanded grout for narrow joints — use unsanded for 1/16 to 1/8 inch joints and delicate tile, sanded for 1/8 inch and wider, epoxy for showers and wet areas (no sealer needed). Cement grout needs sealing after curing; epoxy never does. The Tile Calculator sizes the tiles themselves, and the Tile Installation Cost Calculator prices the whole job.
grout per sq ft (lb) = (L + W) / (L x W) x joint width x joint depth x K (14.5 sanded / 12.0 unsanded) · total lb = per sq ft x area x (1 + waste%) · bags = ceil(total lb / bag size) · epoxy kits = ceil(joint volume / 188.9 cu in)
Related tools
Also try the Tile Calculator for tile quantities, the Tile Installation Cost Calculator for the full job, and the Shower Square Footage Calculator for bathroom tiling.
Tile grout calculator FAQ
How much grout do I need for 100 sq ft?
For 12x12 inch tile with 1/8-inch joints and 3/8-inch thick tile, about 11.33 lb net — 12.46 lb with 10% waste, so one 25 lb bag. Smaller tiles need more: 6x6 tile on the same floor needs about 24.9 lb.
Sanded or unsanded grout — which do I need?
Unsanded for joints 1/16 to 1/8 inch and for polished stone or glass tile; sanded for joints 1/8 inch and wider, which is most floor tile; epoxy for showers, kitchens and wet areas where stain resistance matters.
How many bags of grout per 100 sq ft?
Usually one 25 lb bag: 100 square feet of 12x12 tile at 1/8-inch joints takes about 12.5 lb. One bag covers about 221 square feet at that size and joint. Mosaic or small tile can need two or more bags.
What is the minimum grout joint width?
ANSI A108.10 sets a 1/16-inch minimum joint width for calibrated tile, and the joint must be at least 3 times the tile's facial-dimension variation. Most floor tile uses 1/8 to 3/16 inch joints.
Does grout need to be sealed?
Cement grout (sanded and unsanded) needs sealing after it cures; epoxy grout never does — it is stain-proof by itself. Sealer coverage is roughly 200 square feet per bottle for cement grout.
How much does tile grout cost?
Sanded and unsanded grout run about $16 to $26 per 25 lb bag; epoxy kits run about $60 to $90 and cover less area per dollar but skip sealer forever. Grout is a small line on most tiling jobs.
How do I check the estimate against the bag?
Manufacturer coverage charts differ because products differ — use this estimate to plan, then confirm against the coverage chart printed on the bag you actually buy before a large order.