SwiftTools

Epoxy Garage Floor Calculator

A 20 by 20 foot garage needs 6 gallons of epoxy for two coats at 150 sq ft per gallon with 10% waste — 5.9 gallons exact. Enter your floor below for your exact count.

Your epoxy floor
gallons = floor area x coats x (1 + waste%) / coverage per gallon · flake = area / 100 x broadcast rate · 1 gallon at 1 mil covers 1,604 sq ft

Quantity only — gallons and flake to buy, no installed price (see the Epoxy Flooring Cost Calculator for that). Coverage per gallon is printed on the product data sheet: 100% solids epoxy covers about 150 sq ft per gallon at 10+ mils per coat, primer about 200, water-based epoxy up to 250. Always use your product's stated coverage — it wins over the default. Freshly ground or porous slabs drink more material, so use 15% waste on them.

How the epoxy garage floor calculator works

Epoxy is bought by the gallon, and every coat uses another full round of coverage over the same floor. The estimate is three steps: find the floor area, multiply by the number of coats and the waste allowance, then divide by the coverage printed on the product you are buying. Gallons = area x coats x (1 + waste%) / coverage per gallon, rounded up to a whole gallon. The other way to the same answer is the mils formula the trade uses: gallons = square feet x thickness in mils / 1,604, because one gallon spread 1 mil thick covers 1,604 sq ft. A single body coat on a garage floor is about 10 to 20 mils — a 20 by 20 foot floor at one 10-mil coat is 400 x 10 / 1,604 = 2.49 gallons, or 2.75 with 10% waste.

Worked example: a 20 by 20 foot garage is 400 sq ft. Two coats at 150 sq ft per gallon with 10% waste is 400 x 2 x 1.10 = 880 sq ft of coverage, or 5.9 gallons — buy 6. A typical 2-car garage of about 450 sq ft on a flake system needs roughly 4 gallons of tinted base coat, 71 lb of flake (2 boxes) and 5 gallons of polyaspartic topcoat, with 10% waste. Do not use the flood-coat figure as a floor-coat answer: a 12 by 20 foot garage at 1/8 in (125 mils) needs 18.7 gallons, but that is a self-levelling flood pour, not the thin coats a garage floor system uses.

Common mistakes: counting one coat when the system needs two or three (primer or base plus topcoat — a flake floor is three passes); using the 125-mil flood figure for a normal floor and ordering three times too much; and skipping the waste allowance on ground or porous concrete, which drinks the first coat. Always check the product data sheet for its coverage at your target thickness — 100% solids epoxy covers about 150 sq ft per gallon, primer about 200, water-based up to 250 — and buy all gallons in one batch so the colour matches. For the installed price, use the Epoxy Flooring Cost Calculator.

gallons = floor area x coats x (1 + waste%) / coverage per gallon · or gallons = sq ft x mils / 1,604 · flake = area / 100 x broadcast rate · full broadcast 4–6 lb per 100 sq ft

Related tools

Also try the Epoxy Flooring Cost Calculator for the installed price, the Concrete Slab Calculator for the slab underneath, and the Paint Calculator for wall paint on the same garage.

Epoxy garage floor calculator FAQ

How many gallons of epoxy do I need for my garage floor?

Multiply your floor area by the number of coats and the waste factor, then divide by the coverage per gallon and round up. A 400 sq ft floor with 2 coats at 150 sq ft per gallon and 10% waste needs 5.9 gallons — buy 6.

How many square feet does a gallon of epoxy cover?

100% solids epoxy covers about 150 sq ft per gallon at 10+ mils per coat, primer about 200, and water-based epoxy up to 250. Always use the coverage printed on your product data sheet.

How thick should epoxy be on a garage floor?

A residential system totals about 1/8 in (125 mils) across all coats, with each body coat around 10 to 20 mils. The 125-mil figure is the whole system, not one coat — do not pour it as a single flood coat.

How much flake do I need for an epoxy floor?

A full broadcast uses 4 to 6 lb per 100 sq ft — use 5 lb in this calculator. A light accent broadcast uses about 2 lb per 100 sq ft. A 400 sq ft floor at full broadcast needs 20 lb.

How many coats of epoxy for a garage floor?

Two coats is the standard system — primer or base coat plus topcoat. A flake floor adds a clear topcoat over the flakes, making three passes. Every coat is a full round of coverage over the same floor.

How much does it cost to epoxy a garage floor?

This page counts gallons only. For the price, use the Epoxy Flooring Cost Calculator — it prices the same system by the square foot for DIY and professional jobs.

Can I apply epoxy over a painted or sealed garage floor?

No — epoxy needs bare concrete ground to a CSP 2 to 3 profile. Paint or sealer blocks the bond and the coating will peel. Grind or shot-blast first, and run a moisture test before you order.