Concrete Steps Calculator
Enter your step count, riser and tread sizes and stair width, and this concrete steps calculator returns the concrete volume, the 80 lb bag count, and the material cost by bags or ready-mix — with the installed price range.
Under the IRC, maximum riser height is 7.75 inches and minimum tread depth is 10 inches — this calculator enforces both. One 80 lb bag of concrete mix yields 0.60 cubic feet; ready-mix runs about $145 to $200 per cubic yard, with a $100 to $200 short-load fee under 3 cubic yards. Bag mix is practical under about 1 cubic yard; above that, ready-mix is usually cheaper and far less work. Installed poured steps run about $300 to $500 per step including forming, pouring and finishing. This is a planning estimate, not a structural design — verify footing depth and frost requirements locally.
How the concrete steps calculator works
Concrete steps are two volumes stacked together: the triangular step pyramid underneath and the base slab that ties the staircase to the ground. The pyramid is half of total rise times total run times width — the triangle formed by the whole flight — and the base slab is total run times width times slab thickness. Divide the sum by 27 for cubic yards, add 10% waste for an uneven subgrade and what stays in the chute, then convert to 80 lb bags at 0.60 cubic feet per bag. Ready-mix is priced per cubic yard plus a $100 to $200 short-load fee under 3 cubic yards ($150 used here); bag mix is priced per bag at $6.50 to $9 each.
Worked example: 4 steps, 7-inch risers, 11-inch treads, 4 feet wide, 4-inch base slab. Total rise is 4 x 7 / 12 = 2.33 feet; total run is 4 x 11 / 12 = 3.67 feet. The pyramid is 0.5 x 2.33 x 3.67 x 4 = 17.11 cubic feet; the slab is 3.67 x 4 x 4 / 12 = 4.89 cubic feet; the total is 22.00 cubic feet, or 0.81 cubic yards. With 10% waste, order 0.90 cubic yards. That is 41 bags of 80 lb mix (0.90 x 27 / 0.60 = 40.3, rounded up), costing $307.50 at $7.50 per bag — or $157.50 of ready-mix plus the $150 short-load fee, also $307.50. Installed, the same 4 steps run about $1,200 to $2,000 at $300 to $500 per step.
Common mistakes: counting only the visible step wedges and forgetting the solid pyramid underneath (most first-time estimators come up 30% to 40% short), forgetting the base slab and landing, and ordering exactly the net volume with no waste allowance. Bag mix is practical under about 1 cubic yard; above that, ready-mix is cheaper per yard and far less mixing. Use at least 4,000 psi concrete for outdoor steps, and keep risers at or under 7.75 inches and treads at or over 10 inches per the IRC. The Deck Stair Calculator sizes wood stairs the same way.
pyramid (cu ft) = 0.5 x (steps x riser / 12) x (steps x tread / 12) x width · slab (cu ft) = (steps x tread / 12) x width x slab / 12 · order (cu yd) = (pyramid + slab) / 27 x (1 + waste%) · bags = ceil(order x 27 / 0.60)
Related tools
Also try the Deck Stair Calculator for wood stairs, the Concrete Block Calculator for block work, and the Gravel Calculator for base material.
Concrete steps calculator FAQ
How much concrete do I need for steps?
Add the step pyramid (0.5 x total rise x total run x width) to the base slab, divide by 27, and add 10% waste. Four 7-inch by 11-inch steps, 4 feet wide with a 4-inch slab, need 0.81 cubic yards net — order 0.90.
How many 80 lb bags of concrete for steps?
Divide the ordered cubic yards by 0.60 cubic feet per bag and round up. A 4-step stair ordering 0.90 cubic yards needs 41 bags; a 3-step entry ordering 0.37 cubic yards needs 17 bags.
Should I use bags or ready-mix for concrete steps?
Bag mix is practical under about 1 cubic yard — a 4-step stair costs about the same either way ($307.50 here). Above 1 cubic yard, ready-mix at $145 to $200 per yard is usually cheaper and far less work, and the short-load fee disappears over 3 cubic yards.
What is the maximum riser height for concrete steps?
7.75 inches under the IRC, with a minimum tread depth of 10 inches. This calculator enforces both limits, and every riser in a flight should be within 3/8 inch of the others.
How much do concrete steps cost installed?
About $300 to $500 per step installed, including forming, pouring and finishing — so a 3-step front stoop runs $900 to $1,500 and a 10-step staircase $3,000 to $5,000. Replacing existing steps adds $200 to $500 for demolition.
What strength concrete should I use for outdoor steps?
At least 4,000 psi, which is the common outdoor minimum. It resists freeze-thaw damage and salt far better than lower-strength mixes.
Why add 10% waste to a concrete order?
An uneven subgrade, spillage, and what stays in the chute or mixer all eat concrete. Ten percent is the standard allowance for stair pours; ordering exactly the net volume almost always comes up short.