SwiftTools

Retaining Wall Block Calculator

Enter your wall length, height and block size, and this retaining wall block calculator returns the blocks per course, the courses including the buried first course, blocks to buy with waste, caps, and the base and drainage gravel in cubic yards and tons.

Your retaining wall
blocks per course = ceil(wall length x 12 / block length) · courses = ceil(height x 12 / block height) + 1 buried course · wall blocks = per course x courses · buy = ceil(blocks x (1 + waste%)) · caps = blocks per course · base gravel = length x 1.5 ft x 0.5 ft / 27 · drainage gravel = length x height x 1 ft / 27 · tons = cubic yards x 1.4

Counts are for a straight run with identical segmental blocks; corners add 1 to 2 blocks and curves add 5% to 10% over the straight count. The buried first course keeps frost from lifting the wall — about one tenth of the wall height below grade. Walls over about 3 to 4 feet tall usually need an engineered design, a permit and geogrid reinforcement, and most jurisdictions require them. This is a planning estimate for materials, not a structural design — confirm block dimensions with your supplier and local rules before ordering.

How the retaining wall block calculator works

Blocks are counted in two steps. Blocks per course is the wall length in inches divided by one block length, rounded up — a partial block still has to be bought and cut. Courses is the wall height in inches divided by one block height, rounded up, plus one buried first course below grade, which keeps frost from lifting the wall. Multiply the two for the field blocks, add 5% for cuts and breakage, and count one cap stone per block length along the top. Base gravel is length times a 1.5-foot-wide, 6-inch-deep pad divided by 27 (cubic yards); drainage gravel behind the wall is length times height times 1 foot thick divided by 27; both convert to tons at 1.4 tons per cubic yard.

Worked example: a 20-foot-long, 2-foot-high wall in standard 16x8-inch blocks. Blocks per course is 240 / 16 = 15; visible courses are 24 / 8 = 3, plus 1 buried course = 4 courses; field blocks are 15 x 4 = 60, and 5% waste makes 63 to buy. Caps are 15. Base gravel is 20 x 1.5 x 0.5 / 27 = 0.56 cubic yards (0.78 tons); drainage gravel is 20 x 2 x 1 / 27 = 1.48 cubic yards (2.07 tons). At $3.50 per block and $4 per cap, materials are 63 x $3.50 = $220.50 plus 15 x $4 = $60, or $280.50 before gravel and delivery. A 20-foot, 3-foot wall in 12x8 blocks is 5 visible courses plus 1 buried = 6 courses of 20 blocks = 120 blocks, 126 with waste.

Common mistakes: forgetting the buried course (the wall ends up a course short and unstable), using nominal block size instead of the actual face dimensions, and skipping the drainage gravel and drain pipe — water pressure behind a wall, not the blocks, is what usually causes failure. Line the back of the wall and the gravel with geotextile fabric so silt cannot clog the drain, and slope the drain pipe toward a daylight outlet. Retaining wall blocks run roughly $2 to $5 each. The Retaining Wall Cost Calculator prices the whole installed job including labor.

blocks per course = ceil(length x 12 / block length) · courses = ceil(height x 12 / block height) + 1 buried · buy = ceil(per course x courses x (1 + waste%)) · caps = blocks per course · gravel (cu yd) = length x width x depth / 27 · tons = cu yd x 1.4

Related tools

Also try the Retaining Wall Cost Calculator for the installed price, the Concrete Block Calculator for block walls, and the Gravel Calculator for bulk stone quantities.

Retaining wall block calculator FAQ

How many retaining wall blocks do I need?

Divide wall height by block height for courses, length by block length for blocks per course, then multiply. A 20-foot by 2-foot wall in 16x8 blocks needs 15 per course x 4 courses (3 visible + 1 buried) = 60 blocks, or 63 with 5% waste.

Why add a buried course?

The first course sits below grade — about one tenth of the wall height — so frost cannot lift the wall and the base stays locked in. Forgetting it leaves the wall a course short and less stable.

How many cap stones do I need?

One per block length along the top: a 20-foot wall with 16-inch blocks needs 15 caps. Caps finish the top course, protect the block cores from water, and are usually glued down with construction adhesive.

How much gravel do I need behind a retaining wall?

Base gravel is length x 1.5 feet wide x 6 inches deep (a 20-foot wall needs 0.56 cubic yards); drainage gravel is length x height x 1 foot thick (the same wall needs 1.48 cubic yards). Both convert at 1.4 tons per cubic yard.

How tall can a retaining wall be without an engineer?

Walls up to about 3 to 4 feet tall can usually be built as self-supporting gravity walls. Above 4 feet most jurisdictions require an engineered design, a permit and usually geogrid reinforcement tied back into the soil.

What size are standard retaining wall blocks?

Common segmental units are 16 inches long by 8 inches high, or 18 by 8 inches; smaller garden units run 12 by 4 inches. Always use the actual face dimensions from your supplier, not the nominal size.

How much do retaining wall blocks cost?

Roughly $2 to $5 each, so a 63-block wall is about $126 to $315 in blocks before caps, gravel and delivery. This calculator prices blocks and caps from the rates you enter.