SwiftTools

Pea Gravel Calculator

A 10 by 10 foot patio at 3 inches deep needs 0.93 cubic yards of pea gravel — 1.38 tons with the 10% allowance, or 55 half-cubic-foot bags. Pick your project type below and the calculator sets the matching depth for you.

Your pea gravel project
volume (yd³) = length × width × depth ÷ 324 · tons = volume × 1.35 t/yd³ (100 lb/cu ft) · bags = volume ÷ 0.5 cu ft

Pea gravel is washed, rounded 3/8-inch stone. Density is 100 lb per cubic foot — 1.35 short tons per cubic yard (2,700 lb) — the consensus across pea gravel calculators. Depth is set by project: 2 inches for walkways, 2.5–3 inches for patios, 3–4 inches for play areas, 4 inches for French drains. Picking a project above sets the matching depth; adjust it after if your supplier recommends otherwise.

Not for driveways. Pea gravel is rounded and does not lock together like angular crushed stone — it shifts under vehicle weight. Use crushed stone for a driveway. Estimates only — not a quote. Bulk pea gravel typically runs $25–$50 per ton or $30–$60 per cubic yard before delivery; bags run about $4–$7 each.

How the pea gravel calculator works

Pea gravel is washed, rounded 3/8-inch stone, and the calculation is the same as any loose aggregate: area times depth gives volume, and density turns volume into tons. A 10 x 10 ft patio at 3 inches is 100 x 3 / 324 = 0.93 cubic yards; at the consensus density of 100 lb per cubic foot (1.35 short tons per cubic yard, or 2,700 lb), that is 1.25 tons before waste and 1.38 tons with the recommended 10% allowance. Bags are volume divided by 0.5 cubic feet: 27.5 cubic feet with waste is 55 bags.

Depth is set by project, not by preference. Walkways and borders take 2 inches; patios and seating areas 2.5 to 3 inches over a compacted 3-to-4-inch crushed stone base and heavy-duty landscape fabric; play areas 3 to 4 inches; French drains 4 inches. Picking a project above sets the matching depth. One cubic yard covers about 100 square feet at 3 inches deep, and one ton covers about 80 square feet at the same depth.

Worked example, larger patio: a 12 x 12 ft patio at 3 inches deep is 144 x 3 / 324 = 1.33 cubic yards, or 1.80 tons before waste. With 10% extra that becomes 1.47 cubic yards — about 40 cubic feet, or 2 tons, and 80 bags. The bagged-versus-bulk break-even sits near 15 to 20 bags (about 0.4 tons): below that, bags are simpler; above it, bulk delivery is far cheaper per yard.

Common mistakes: ordering pea gravel for a driveway — rounded stone shifts under vehicles and never locks up, so driveways need angular crushed stone; laying pea gravel straight on soil, which lets it sink and mix with mud within a season — the crushed-stone base and fabric matter more than the gravel itself; and skipping the waste allowance, which means a second delivery fee when the load runs short.

volume (yd³) = length x width x depth (in) / 324 · tons = yd³ x 1.35 (100 lb/cu ft) · bags = ceil(yd³ x 54) · 1 yd³ covers ~100 sq ft at 3 in

Related tools

For larger rounded stone, use the River Rock Calculator; for structural stone, the Crushed Stone Driveway Calculator and the Gravel Calculator. Keep weeds down first with the Landscape Fabric Calculator.

Pea gravel calculator FAQ

How much pea gravel do I need?

Multiply length by width by depth in inches and divide by 324 for cubic yards, then multiply by 1.35 tons per cubic yard and add 10% for settling. A 10 x 10 ft patio at 3 inches needs 0.93 cubic yards — 1.38 tons to order, or 55 bags.

How deep should pea gravel be?

2 inches for walkways and borders, 2.5 to 3 inches for patios and seating areas, 3 to 4 inches for play areas, and 4 inches for French drains. Lay it over a compacted 3-to-4-inch crushed stone base and landscape fabric, not straight on soil.

How much does a cubic yard of pea gravel weigh?

About 2,700 pounds — 1.35 short tons — for clean, dry 3/8-inch pea gravel at 100 lb per cubic foot. Wet material weighs more; the volume you need does not change.

How many bags of pea gravel make a cubic yard?

54 bags of 0.5 cubic feet. A 10 x 10 ft patio at 3 inches needs 55 bags with the 10% allowance; a 12 x 12 ft patio at the same depth needs 80. Past about 15–20 bags, bulk delivery is usually cheaper.

How much does pea gravel cost?

Bulk pea gravel typically runs $25–$50 per ton or $30–$60 per cubic yard before delivery, and bags run about $4–$7 each. The calculator defaults to $40 a ton — enter your supplier's quote for an exact figure.

Can I use pea gravel for a driveway?

No — pea gravel is rounded and does not interlock, so it shifts under vehicle weight and ruts quickly. Use angular crushed stone for driveways; pea gravel belongs on patios, paths, play areas, and drains.

How much area does one ton of pea gravel cover?

About 80 square feet at 3 inches deep, or 112 square feet at 2 inches, at the standard 1.35 tons-per-yard density. One cubic yard covers about 100 square feet at 3 inches.