Flooring Underlayment Calculator
A 12 by 14 foot room needs 2 rolls of standard foam underlayment — 176 square feet with the 5% trimming allowance — plus 1 roll of seam tape and, on concrete, 1 roll of vapour barrier. Enter your room size below for the full order.
Roll coverage is the figure printed on the roll you buy — standard foam is commonly 100 square feet per roll and premium foam 200, cork about 100. The calculator uses 5% waste for a simple rectangular room: 10% for a multi-room layout and 15% for diagonal or herringbone floors. Seams are butt-jointed and taped, never overlapped, so the waste allowance is for wall trimming and offcuts, not seam laps.
Estimates only — read your roll. Underlayment goes under bare-bottom laminate and engineered floating floors. Most modern luxury vinyl plank ships with the pad attached and needs none — check the plank first. On concrete, a vapour barrier (or a combo product with one built in) is not optional: moisture wicking up through the slab ruins laminate from below. Planning estimate, not a substitute for professional approval: acoustic (IIC/STC) requirements in multi-family buildings are a code matter — confirm them with the building, not this page.
How the flooring underlayment calculator works
Underlayment is ordered by the roll: rolls equals room area times the waste allowance, divided by the coverage printed on the roll, rounded up. The waste is for wall trimming and offcuts, not seam laps — underlayment seams are butt-jointed and taped, so nothing is lost to overlaps. A 12 by 14 ft room is 168 square feet; with the standard 5% allowance that is 176.4, and at 100 square feet per roll of standard foam that is 1.76, rounded up to 2 rolls.
The roll you buy sets the coverage. Standard foam is commonly 100 square feet per roll, premium foam 200, and cork about 100 — but roll sizes vary by brand, so the figure on your roll replaces the typical one here. The waste band follows the layout: 5% for a simple rectangle, 10% for a multi-room layout with hallways and doorways, 15% for diagonal or herringbone floors. A 15 by 14 ft room at 10% waste is 210 x 1.10 = 231 square feet, or 3 rolls of 100.
Seam tape and vapour barrier ride on the same area. Tape is one roll per 500 square feet of floor — a 300 square foot room needs 1 roll — and a vapour barrier on concrete is one roll per 200 square feet of adjusted area, so the 12 by 14 ft example needs 1 roll. On a wood subfloor there is no barrier line at all: the barrier exists to stop moisture wicking up through a concrete slab, and wood does not need it. Combo products with a barrier built in cover both jobs in one roll.
The question the calculator cannot answer for you is whether you need underlayment at all. Bare-bottom laminate and engineered floating floors do; most modern luxury vinyl plank ships with the pad attached and needs none — check the plank before you order. Underlayment also does not fix an uneven floor: it cushions and quiets, it does not level. A floor that rocks needs levelling compound first, and a floor that bounces needs the subfloor fixed.
Common mistakes: ordering by the box count of the flooring instead of the room area — underlayment is figured on the bare room area, since you do not pad the offcuts the way you pad flooring boxes; skipping the vapour barrier on concrete, which lets moisture ruin laminate from below; and overlapping the seams instead of butt-jointing and taping them, which leaves ridges that telegraph through the floor. One spare roll is cheap insurance for future spot repairs.
rolls = ceil(area x (1 + waste) / coverage per roll) · tape = ceil(area / 500) · vapour barrier = ceil(adjusted area / 200), concrete only · foam 100 sq ft/roll, premium foam 200, cork 100
Related tools
Count the flooring itself with the Laminate Flooring Calculator, the Hardwood Flooring Calculator or the Vinyl Plank Flooring Calculator, and the subfloor sheets with the Plywood Calculator.
Flooring underlayment calculator FAQ
How many rolls of underlayment do I need?
Divide the room area, plus a waste allowance, by the coverage per roll and round up. A 12 by 14 ft room (168 sq ft) with 5% waste needs 2 rolls of standard 100 sq ft foam underlayment — 176.4 sq ft adjusted, or 1.76 rolls.
How much underlayment does one roll cover?
Standard foam is commonly 100 square feet per roll, premium foam 200, and cork about 100. Roll sizes vary by brand, so the figure printed on your roll replaces these typical figures.
Do I need underlayment under vinyl plank flooring?
Usually not — most modern luxury vinyl plank ships with the pad attached. Bare-bottom laminate and engineered floating floors do need it. Check the plank: if it has an attached pad, skip the underlayment entirely.
Do I need a vapour barrier under flooring?
On a concrete subfloor, yes — moisture wicks up through the slab and ruins laminate from below. On a wood subfloor, no barrier is needed. Combo underlayment with a barrier built in covers both jobs in one roll.
How much seam tape do I need?
One roll per 500 square feet of floor — a 300 sq ft room needs 1 roll. Tape seals the butt joints between underlayment runs; seams are butt-jointed and taped, never overlapped.
How much waste should I add for underlayment?
5% for a simple rectangular room, 10% for a multi-room layout with hallways and doorways, 15% for diagonal or herringbone floors. The allowance covers wall trimming and offcuts.
Foam, cork or felt underlayment — which one?
Foam is the standard pick for laminate: cheap, easy, and available with a vapour barrier built in. Cork costs more but damps sound better and suits multi-family floors; felt is the sound-dampening choice under hardwood. Match the type to the floor and the subfloor, not to the price.