SwiftTools

Concrete Sidewalk Cost Calculator

Enter your walk length, width and thickness, and this concrete sidewalk cost calculator returns the installed price range, the cubic yards of concrete to order, and how many panels the walk breaks into — for a new pour or a remove-and-replace job.

Your sidewalk
area (sq ft) = length x width · volume (cu yd) = area x (thickness / 12) / 27 · order = volume x (1 + waste%) · concrete cost = order x price per cubic yard · installed cost = area x $7 to $17 per sq ft (new, broom finish; $14 to $30 to remove and replace) · panels = ceil(length / 4 ft)

Installed rates follow HomeGuide's 2026 sidewalk survey: $7 to $17 per square foot installed for a new broom-finish walk ($1,400 to $3,400 for a 4 by 50 foot walk), and $14 to $30 per square foot to remove and replace, because demolition and disposal stack on top of the new pour. Ready-mix runs about $125 to $175 per cubic yard nationally. Rates are national planning ranges — compare written bids on an identical scope for your local price. This is a planning estimate, not a contractor bid.

How the concrete sidewalk cost calculator works

A sidewalk is priced two ways: the concrete itself and the installed job. Volume is length times width times thickness in feet, divided by 27 for cubic yards — a 4-inch slab holds 0.0123 cubic yards per square foot. The calculator adds 10% for waste and spillage, then multiplies by your ready-mix price (about $125 to $175 a cubic yard nationally) for the concrete-only cost. The installed range is area times $7 to $17 per square foot for a new broom-finish walk, from HomeGuide's 2026 survey; removing and replacing an old walk runs $14 to $30 a square foot because demolition and disposal stack on top of the new pour. Stamped finish adds $3 to $5 a square foot, exposed aggregate $2 to $4, and color $1 to $3.

Worked example: a standard 4 by 50 foot walk, 4 inches thick, new, broom finish. Area is 200 sq ft; volume is 200 x (4 / 12) / 27 = 2.47 cubic yards, 2.72 to order with 10% waste; the ready-mix costs $408 at $150 a yard. Installed, it runs $1,400 to $3,400 — $7 to $17 a square foot — and breaks into 13 panels with control joints every 4 feet. A shorter 4 by 40 foot walk (160 sq ft) runs $1,120 to $2,720 installed on the same rates, with 1.98 cubic yards net and 10 panels. DIY materials only (concrete, base, forms, finishing) run $3 to $6 a square foot, so the same 200 sq ft walk is $600 to $1,200 in materials before tools.

Common mistakes: pricing the concrete and forgetting the base, forms, reinforcement and finishing labor (labor is 50% to 60% of the installed cost), ordering exactly the net volume (spillage and uneven subgrade eat the margin — order 10% extra), and pouring thinner than 4 inches for a walk that carries foot traffic and the occasional wheelbarrow. Control joints go every 4 feet on a 4-foot-wide walk — about one joint per panel — or the slab cracks where it wants to instead of where you planned. The Concrete Slab Cost Calculator prices a patio or shed slab on the same math, and the Concrete Driveway Cost Calculator prices a driveway.

area (sq ft) = length x width · volume (cu yd) = area x (thickness in inches / 12) / 27 · order = volume x 1.10 · concrete cost = order x price per cubic yard · installed = area x $7 to $17 per sq ft (new) or $14 to $30 (remove and replace) · panels = ceil(length / 4 ft)

Related tools

Also try the Concrete Slab Cost Calculator for patios and shed bases, the Concrete Driveway Cost Calculator for driveways, and the Concrete Cubic Yard Calculator for volume alone.

Concrete sidewalk cost calculator FAQ

How much does a concrete sidewalk cost per square foot?

A new concrete sidewalk costs $7 to $17 per square foot installed, or $6 to $12 on the lower end of other 2026 surveys. Removing and replacing an old walk costs $14 to $30 per square foot. DIY materials only run $3 to $6 per square foot.

How much does a 4x50 foot sidewalk cost?

About $1,400 to $3,400 installed for a new broom-finish walk, 4 inches thick. The concrete itself is 2.47 cubic yards net, 2.72 to order, costing about $408 at $150 a cubic yard.

How much does a 4x40 foot sidewalk cost?

About $1,120 to $2,720 installed at $7 to $17 per square foot, with 1.98 cubic yards of concrete net and 10 panels. One 2026 planning calculator puts the same walk at $1,658 to $3,086 on higher $10 to $19 rates.

Is it cheaper to DIY a concrete sidewalk?

Materials only run $3 to $6 per square foot — about $600 to $1,200 for a 200 sq ft walk — against $1,400 to $3,400 installed. DIY saves the labor but needs forms, finishing tools and a full day, and a bad finish is expensive to fix.

How thick should a concrete sidewalk be?

Four inches is the standard for residential walks. Go 5 to 6 inches where vehicles cross it, and always pour on a compacted gravel base. Thinner than 4 inches cracks early under foot traffic and frost.

How many bags of concrete do I need for a sidewalk?

A 4 by 50 foot walk at 4 inches needs 2.72 cubic yards with waste — about 122 bags of 80 lb ready-mix. Bags only make sense for small repairs; order ready-mix by the yard for a full walk.

Do I need a permit for a concrete sidewalk?

Most cities require a permit for a sidewalk that crosses the public right-of-way, and some require one for any new walk. Check with your city before you pour — the permit is not in these prices.