Wallpaper Calculator
Enter your room size, wall height, doors and windows, and the pattern repeat, and this wallpaper calculator returns how many rolls to buy, the strips per roll, and the paper cost — counting only the strips a roll actually yields.
A roll only covers its full-height strips, not its printed area: a US double roll is about 56 square feet printed, but on an 8-foot wall with a 21-inch repeat it gives three strips, about 41 square feet of wall. Buy all rolls from the same batch or dye lot — shades vary between batches. Waste: 10% for plain or small-repeat paper, 15% for straight match, 15% to 20% for half-drop match or large repeats. This is a planning estimate — confirm the actual roll dimensions on your chosen paper.
How the wallpaper calculator works
Wallpaper is bought by the roll but used by the strip, and the strip is what decides the count. Net wall area is the room perimeter times the wall height, less doors (20 square feet each) and windows (12 square feet each). Each strip is the wall height plus one pattern repeat so the design lines up, plus about 2 inches to trim at the top and bottom. Strips per roll is the roll length divided by the strip length, rounded down — leftover length shorter than a strip is waste. Usable area per roll is strips per roll times roll width times wall height; rolls are the net area times (1 + waste%) divided by the usable area per roll, rounded up, because there is no such thing as a partial roll.
Worked example: a 12 by 12 foot bedroom with 8-foot walls, one door and two windows, a 21-inch pattern repeat, US double rolls. Perimeter is 48 feet; gross area is 384 square feet; openings take off 44, leaving 340 square feet to cover. Each strip is 96 + 21 + 2 = 119 inches, so a 33-foot roll gives floor(396 / 119) = 3 strips. Usable area per roll is 3 x (20.5 / 12) x 8 = 41 square feet. Rolls are ceil(340 x 1.10 / 41) = ceil(9.12) = 10 rolls, costing $400 at $40 a roll. The same room with a plain paper (no repeat) gives 4 strips per roll, 54.7 square feet usable, and 7 rolls. A 9-foot wall with a 27-inch repeat gives only 2 strips per roll.
Common mistakes: dividing the wall area by the printed roll area (a 56-square-foot roll covers only about 41 square feet of wall once strips are cut), ignoring the pattern repeat (a 21-inch repeat costs a whole strip per roll), and forgetting to deduct doors and windows. Always buy all rolls from the same batch or dye lot — shades vary between batches — and order one extra roll for mistakes and future repairs. The Interior Painting Cost Calculator prices the painted alternative.
net area = 2 x (length + width) x height - doors x 20 - windows x 12 · strip length = wall height + pattern repeat + 2 in · strips per roll = floor(roll length / strip length) · usable area per roll = strips per roll x roll width x wall height · rolls = ceil(net area x (1 + waste%) / usable area per roll)
Related tools
Also try the Interior Painting Cost Calculator for paint, the Paint Calculator for coverage, and the Drywall Calculator for the walls themselves.
Wallpaper calculator FAQ
How many rolls of wallpaper do I need for a 12x12 room?
With 8-foot walls, one door, two windows, a 21-inch pattern repeat and US double rolls, about 10 rolls including 10% waste. A plain paper with no repeat needs about 7, because each roll then gives four strips instead of three.
What is a US double roll of wallpaper?
About 20.5 inches wide and 33 feet long, roughly 56 square feet printed. A US single roll is the same width but 16.5 feet long, about 28 square feet. A European roll is 0.53 m wide and 10.05 m long, about 5.3 square metres.
How does the pattern repeat change the roll count?
Each strip must be wall height plus one full repeat plus trim, so a bigger repeat means fewer strips per roll. On an 8-foot wall, a plain paper gives 4 strips per roll, a 21-inch repeat gives 3, and a 27-inch repeat on a 9-foot wall gives only 2.
How much waste should I add for wallpaper?
Ten percent for plain or small-repeat paper, 15% for straight match, and 15% to 20% for half-drop match or large repeats. Always order one extra roll for mistakes and future repairs.
Do I subtract doors and windows from wallpaper area?
Yes — deduct about 20 square feet per door and 12 per window (3 by 4 feet). This calculator does it automatically from the door and window counts.
What is a wallpaper drop or strip?
One full-height length of paper from ceiling to baseboard, cut from the roll. Strips are the unit that matters: a roll only covers its strips, not its printed area, because leftover length shorter than a strip is waste.
Why buy all wallpaper rolls from the same batch?
Shades vary between batches and dye lots, so rolls from different batches can show a visible line on the wall. Buy every roll for one room from the same batch, plus one spare.