Fire Pit Brick Calculator
Enter your fire pit size and brick type, and this fire pit brick calculator returns the bricks per course, the number of courses, and how many bricks to buy — round or square, with the waste a real build needs.
Use firebrick with refractory mortar for the inner ring where flame touches the wall; standard brick is fine for the outer ring. Build on 2 to 4 inches of compacted gravel for drainage, and check local rules — some areas require a screen or a setback from structures. This is a planning estimate.
How the fire pit brick calculator works
A fire pit wall is a ring of bricks, so the count starts with the distance around it. For a round pit that is the circumference — pi times the diameter; for a square pit it is four times the side length. Divide that by one brick length plus its mortar joint and round up: that is the bricks in one course. Divide the pit height by one brick height plus its joint and round up: that is the number of courses. Multiply the two, then add 10 to 15% for cuts and breakage.
Worked example: a 36-inch round pit, 12 inches high, built with standard modular brick (7-5/8 inches long, 2-1/4 inches high, 3/8-inch joints) has a circumference of 113.1 inches. Each course takes 113.1 divided by 8, rounded up to 15 bricks, and the height takes 12 divided by 2.625, rounded up to 5 courses — 75 bricks net, 83 to buy with 10% waste, about $46 at $0.55 a brick. That matches the commonly quoted 80 bricks for a 36-inch pit.
Common mistakes: using regular brick for the inner ring where flame touches the wall — use firebrick with refractory mortar there and standard brick for the outer ring; forgetting the joint in the brick pitch, which quietly undercounts a whole course; and building straight on soil, which traps water — set the pit on 2 to 4 inches of compacted gravel. A square pit is a little cheaper on bricks than a round one of the same width, because a circle encloses more perimeter per area. The Mortar Calculator sizes the mortar for the joints.
round: circumference = π x diameter · square: perimeter = 4 x side · per course = ceil(perimeter / (brick length + joint)) · courses = ceil(height / (brick height + joint)) · buy = per course x courses x (1 + waste%)
Related tools
Also try the Mortar Calculator for the joints, the Brick Calculator for walls, and the Gravel Calculator for the base under the pit.
Fire pit brick calculator FAQ
How many bricks do I need for a 3-foot fire pit?
A 36-inch round pit, 12 inches high, in standard modular brick needs 75 bricks net — 83 to buy with 10% waste, about $46 at $0.55 a brick. A 4-foot pit needs about 100 net, 110 to buy.
What size brick is best for a fire pit?
Firebrick (9 by 4-1/2 by 2-1/2 inches) for the inner ring where flame touches the wall — it is made to take high heat. Standard modular brick (7-5/8 by 2-1/4 inches) is fine for the outer ring and the cap.
Can I use regular bricks for a fire pit?
For the outer ring, yes. For the inner ring, no — regular brick can crack and spall under direct flame. Line the inside with firebrick set in refractory mortar.
How many courses high should a fire pit be?
Typically 4 to 5 courses, about 12 inches above ground — high enough to contain the fire, low enough to sit around comfortably. Taller pits need a wider base to stay stable.
How much mortar do I need for a fire pit?
Roughly one bag of mortar mix per 40 to 50 bricks at 3/8-inch joints. Use refractory mortar for the firebrick inner ring and standard Type N or S mortar for the outer ring.
Do I need a gravel base under a fire pit?
Yes — 2 to 4 inches of compacted gravel under the pit drains water away and keeps the bottom course from sitting in mud. Without it, freeze-thaw cycles shift the ring.
How much does a brick fire pit cost?
The brick for a 36-inch pit is about $46; a complete DIY build with gravel base, mortar and a cap ring typically runs $100 to $300, depending on brick choice and whether you add a metal insert.