Tile Adhesive Calculator
A 20 kg bag of tile adhesive covers about 4 to 5 square metres on standard tiles — about 45 to 50 sq ft — so a 100 sq ft floor needs about 51 kg, or 3 bags. Enter your area and tile size below for your exact count.
Quantity only — kilograms and bags to buy. Rates are the consensus of the leading adhesive calculators: about 3.5 kg per square metre for small wall tiles, 5 for standard floor tiles and 7 for large-format tiles that need a thicker bed and back-buttering. A 20 kg bag covers about 4 to 5 square metres (45 to 50 sq ft) at a thin 3 mm bed and about 3 square metres (26 to 32 sq ft) at the 10 to 12 mm beds large tiles need. Always confirm against the coverage printed on your bag — trowel notch and substrate flatness move the real figure.
How the tile adhesive calculator works
Tile adhesive is bought by weight and sold by the bag, so the calculation is area times a coverage rate, plus waste, divided by the bag size. The rate depends on the tile, because bigger tiles need a deeper notched-trowel bed: the consensus across the leading calculators is about 3.5 kg per square metre for small and medium wall tiles, 5 kg per square metre for standard floor tiles, and 7 kg per square metre for large-format tiles over 600 mm that need a thicker bed and back-buttering. The same figures appear another way in manufacturer data: about 4.3 kg per square metre at a 3 mm bed, rising to about 6.7 at a 10 mm bed — which is why one 20 kg bag covers roughly 45 to 50 sq ft on a thin bed but only 26 to 32 sq ft under large vitrified tiles.
Worked example: a 3 by 2.4 metre wall is 7.2 square metres. In small tiles at 3.5 kg per square metre that is 25.2 kg, plus a 5% buffer 26.5 kg — 1.32 bags of 20 kg, so buy 2. The same wall in large-format tiles at 7 kg per square metre needs 52.9 kg, or 3 bags. A 100 sq ft floor in standard tiles is 9.29 square metres; at 5 kg per square metre that is 46.5 kg, plus 10% waste 51.1 kg — 2.56 bags, so buy 3. A 10 square metre floor in 300 by 300 mm tiles needs about 121 tiles including 10% waste, about 2 bags of adhesive and 5 kg of grout.
Common mistakes: using the thin-bed coverage for large tiles (a 20 kg bag that covers 50 sq ft at 3 mm covers barely 30 sq ft at 10 mm, so the order can come up two bags short); forgetting waste entirely (10% is the standard allowance for cuts, uneven substrate and dropped material); and buying by the square foot of the room instead of the area actually tiled — deduct the bath, the vanity footprint and any area that stays untiled. For grout, use the Tile Grout Calculator; for the tiles themselves, the Tile Calculator; for the whole installed price, the Tile Installation Cost Calculator.
kg = area (m²) x rate (kg per m²) x (1 + waste%) · bags = ceil(kg / bag weight) · rates: wall tiles 3.5, standard floor 5, large-format 7 kg per m² · 20 kg bag: 45–50 sq ft at 3 mm, 26–32 sq ft at 10–12 mm
Related tools
Also try the Tile Calculator for the tiles themselves, the Tile Grout Calculator for grout, and the Thinset Calculator for the US thinset version of this job.
Tile adhesive calculator FAQ
How many bags of tile adhesive do I need per square metre?
About 3.5 kg per square metre for small wall tiles, 5 kg for standard floor tiles and 7 kg for large-format tiles. A 20 kg bag therefore covers about 4 to 5 square metres on standard tiles and about 3 square metres on large-format tiles.
How much area does a 20 kg bag of tile adhesive cover?
About 4 to 5 square metres (45 to 50 sq ft) at a thin 3 mm bed, and about 3 square metres (26 to 32 sq ft) at the 10 to 12 mm beds large vitrified tiles need. The trowel notch and substrate flatness move the real figure — check the bag.
How much tile adhesive do I need for 100 sq ft?
A 100 sq ft floor in standard tiles needs about 46.5 kg, or 51.1 kg with 10% waste — buy 3 bags of 20 kg. The same area in large-format tiles needs about 65 kg with waste, or 4 bags.
Is wall tile adhesive different from floor tile adhesive?
The adhesive is often the same product; the rate differs. Wall tiles use about 3.5 kg per square metre because the bed is thinner, floor tiles about 5, and large-format floor tiles about 7 with back-buttering. Heavy stone tiles may need a stronger grade — check the bag.
What trowel notch size should I use?
A 6 mm notched trowel suits small and medium tiles; large-format tiles over 600 mm need a 10 to 12 mm notch and back-buttering so the adhesive covers the full back of the tile. A bigger notch uses more adhesive — that is why the large-format rate is higher.
Do I need to back-butter large tiles?
Yes. Large-format tiles need solid-bed fixing: butter the back of each tile as well as combing the floor, and allow about 15% waste instead of 10%. Without it, voids under the tile can crack it under load.
How much waste should I add for tile adhesive?
10% is the standard allowance for a straightforward job; use 15% for large-format tiles, uneven substrates or diagonal layouts. If the estimate lands exactly on a whole-bag number, keep one extra bag on standby for the last stretch.