Tile Installation Cost Per Square Foot Calculator
Tile installation costs about $7–$18 per square foot installed in 2026 — roughly $1,400–$3,600 for a typical 200 sq ft room. Enter your area below for a low-to-high estimate with a labor-vs-material split.
12 × 10 ft room = 120 sq ft · porcelain installs $8–$15/sq ft
Estimates only — not contractor quotes. Tile installation costs vary by tile type, pattern complexity, region, and subfloor condition. Get 2–3 local quotes before committing.
How the tile installation cost calculator works
Tile is priced per square foot installed, and that single rate bundles three things: the tile itself ($3–$8/sq ft), setting materials like thinset and grout, and the labor to lay it ($4–$10/sq ft). Tile type is the biggest lever — basic ceramic installs near $7–$12, porcelain $8–$15, and natural stone $12–$18.
What moves your number: total square footage, tile size and pattern (large-format and diagonal layouts cost more in labor), subfloor condition, old flooring removal ($1–$3/sq ft), and waste factor — order 10% extra for straight layouts, 15% for diagonal or cut-heavy rooms.
total = area × (1 + waste) × $/sq ft + removal · 200 sq ft + 10% waste = 220 sq ft to order
Keep exploring
Planning the layout too? The Tile Calculator figures how many tiles and boxes your pattern needs, and the Carpet Removal Cost Calculator estimates tear-out if you are replacing old flooring first.
Tile installation cost calculator FAQ
How much does tile installation cost per square foot?
About $7–$18 per square foot installed in 2026. Materials run roughly $3–$8/sq ft depending on tile type; professional labor adds another $4–$10/sq ft.
How much does it cost to tile a 12×12 bathroom?
A 12×12 room is 144 sq ft — add 10% waste and you order about 158 sq ft, which lands around $1,100–$2,850 installed. Natural stone pushes toward the high end.
Is porcelain tile more expensive to install than ceramic?
Yes — porcelain is denser and harder to cut, so installers typically charge $1–$3 more per square foot in labor. The tile itself also costs more per square foot.
What is the labor cost to install tile per square foot?
Labor alone runs about $4–$10 per square foot. Simple straight-lay ceramic on a prepped floor sits near $4–$6; intricate patterns, large-format, or natural stone run $8–$10.
How much extra tile should I order?
Order 10% extra for straight layouts and 15% for diagonal patterns or rooms with many cuts and niches. Running short mid-project risks dye-lot mismatches on the reorder.
Does the installed rate include grout and thinset?
Usually yes — a per-square-foot installed quote normally bundles tile, thinset, grout, and labor. Confirm in writing; some quotes exclude subfloor prep or old-floor removal.
Tile vs vinyl plank flooring cost — which is cheaper?
Vinyl plank ($3–$10/sq ft installed) is cheaper upfront than tile ($7–$18). Tile wins on lifespan in wet areas and adds more resale value in kitchens and baths.