Basement Waterproofing Cost Calculator
Most homeowners spend $4,000–$15,000 to waterproof a basement, and the method sets the price: interior drainage runs $60–$120 per linear foot, exterior excavation $100–$250. Enter your wall length and method below for your range.
Planning estimate only — get three local quotes before hiring. Rates are 2026 US averages from Angi, This Old House and HomeGuide as compiled by the leading waterproofing calculators. Bowing walls, settlement or structural cracks are a different job — see the Foundation Repair Cost Calculator — and a sealant alone will not fix a wall that leaks at the floor joint.
How the basement waterproofing cost calculator works
Waterproofing is priced by the linear foot of wall treated, not by the square foot of the basement — that is the first thing the calculators agree on. The method is the main variable: an interior sealant or coating runs $10–$40 per linear foot and only handles surface dampness; a subfloor or footer drain tile runs $25–$55; interior drainage (a weeping tile / French drain inside, trenched along the wall-floor joint) runs $60–$120 and is the most common comprehensive fix; exterior excavation with a membrane runs $100–$250 and is the most complete, because it stops water before it enters. Tight or finished access adds about 25%, a foundation crack costs $250–$800 to inject, a sump pump system $800–$3,000, a battery backup $300–$600, and a drainage permit about $250.
Worked example: a typical 1,000-square-foot basement has about 130 linear feet of wall. Interior drainage on that wall costs 130 times $60–$120, or $7,800–$15,600, with a midpoint of $11,700 — the same range the leading waterproofing calculators show for this exact job. Add a sump pump system at its $1,900 midpoint and the estimate becomes about $13,600. The same 130 feet done from the outside costs 130 times $100–$250, or $13,000–$32,500, before the sump and permit. A full interior system for 120 feet with a primary and battery-backup sump, permit and 10% contingency comes to about $10,900 on the most detailed calculator — the same ballpark, reached a different way.
Common mistakes: pricing by the square foot of floor area (contractors price by the wall, so a square-foot quote hides the real variable); paying for a sealant alone on a wall that leaks at the floor joint (coatings do not stop hydrostatic pressure — only drainage or exterior work does); forgetting the sump pump and battery backup (a drain without a pump has nowhere to send the water, and storms knock out power); and treating bowing walls or settlement cracks as a waterproofing job — those are structural, priced by piers and anchors on the Foundation Repair Cost Calculator, not by the linear foot of membrane. Always get three quotes: soil, foundation depth and local labor move any job inside its range.
total = wall length x method $/linear ft x access factor + cracks x $250–$800 + sump pump $800–$3,000 + battery backup $300–$600 + permit $250
Related tools
Also try the Foundation Repair Cost Calculator for structural wall work, the French Drain Cost Calculator for yard drainage, and the Sump Pump Installation Cost Calculator for the pump alone.
Basement waterproofing cost FAQ
How much does basement waterproofing cost?
Most homeowners spend $4,000–$15,000 for a typical job, with about $5,000 the most common figure. A full interior system for 120 linear feet runs about $10,900; exterior excavation for the same wall runs $13,000–$32,500. Get three local quotes — soil and depth move any job inside its range.
How much is interior drainage per linear foot?
$60–$120 per linear foot installed, including the trench, perforated pipe in gravel and the concrete patch. A 130-foot wall — a typical 1,000 sq ft basement — costs $7,800–$15,600 for the drainage alone.
How much is exterior waterproofing per linear foot?
$100–$250 per linear foot: dig to the footing, clean and repair the wall, apply a waterproof membrane, add a footing drain, then backfill. Some guides go to $300–$350 on deep or difficult excavations. It costs more because it stops water before it enters.
How much does a sump pump system cost?
About $800–$3,000 installed for the pump, pit and discharge, and $300–$600 more for a battery backup pump. A drain tile system without a pump has nowhere to send the water, so budget the pump with the drain.
How much does crack injection cost?
$250–$800 per foundation crack, depending on length, width and access. Injection seals a leaking crack from the inside; a crack that is still moving, or a wall that bows, needs structural repair instead.
Will a waterproof sealant alone fix my basement?
Only for minor surface dampness. A coating at $10–$40 per linear foot cannot stop water driven by hydrostatic pressure at the wall-floor joint — that needs interior drainage or exterior excavation. Sealant over a leaking joint is the most common wasted spend in this trade.
Is basement waterproofing priced by the square foot?
No — contractors price by the linear foot of wall treated. Per square foot of floor area most projects land between about $5 and $15, but that is a rough rule; the wall length, the method and the access decide the real price.