Deck Joist Span Calculator
Enter your joist span, spacing and deck length, and this deck joist span calculator returns the smallest Southern Pine No.2 joist that works — plus the joist count and the maximum cantilever past the beam.
Deck joists are NOT floor joists: these spans assume treated lumber in wet service outdoors. The indoor floor joist table gives different (longer) spans and must not be used for a deck.
Planning estimate, not a substitute for professional approval. Confirm the size with your local building department or a licensed engineer before building — snow load, cantilever and ledger rules vary by jurisdiction.
How the deck joist span calculator works
Deck joist spans come from a published table, not a formula: for No.2 Southern Pine at 40 psf live load plus 10 psf dead load, L/360 deflection, in wet service, a 2x8 spans 13 ft 1 in at 12 inches on center, 11 ft 10 in at 16 inches, and 9 ft 8 in at 24 inches. A 2x10 at 16 inches spans 14 ft 0 in, and a 2x12 at 16 inches spans 16 ft 6 in.
Worked example: a 12-foot span at 16 inches on center. The 2x8 maximum is 11 ft 10 in, so it fails by 2 inches; the 2x10 maximum is 14 ft 0 in, so it works with 2 feet to spare — the calculator picks 2x10. For a 16-foot deck length at 16-inch spacing you need ceil(192 / 16) + 1 = 13 joists.
Common mistakes: using the indoor floor joist table for an outdoor deck (treated lumber in wet service spans less), measuring spacing edge-to-edge instead of on center, and cantilevering more than one quarter of the adjacent span. Heavy snow-load areas need shorter spans than this table — check your local code.
Southern Pine No.2, 40 psf live + 10 psf dead, L/360, wet: 2x6 9-11 / 9-0 / 7-7 · 2x8 13-1 / 11-10 / 9-8 · 2x10 16-2 / 14-0 / 11-5 · 2x12 18-0 / 16-6 / 13-6 (at 12 / 16 / 24 in)
Related tools
For indoor floors use the Floor Joist Span Calculator instead — its table is different. Then lay out the boards with the Deck Board Staggering Calculator and space the posts with the Deck Post Spacing Calculator.
Deck joist span calculator FAQ
How far can a 2x8 deck joist span?
For No.2 Southern Pine at 40 psf live plus 10 psf dead load: 13 ft 1 in at 12 inches on center, 11 ft 10 in at 16 inches, and 9 ft 8 in at 24 inches. Other species and grades span slightly less.
What size joist do I need for a 12-foot deck span?
At 16 inches on center, a 2x10: a 2x8 tops out at 11 ft 10 in, just short of 12 feet, while a 2x10 reaches 14 ft 0 in. At 12-inch spacing a 2x8 works, reaching 13 ft 1 in.
Are deck joist spans the same as floor joist spans?
No. Deck joists use treated lumber in wet service outdoors, so their spans are shorter than indoor floor joists of the same size. Never size a deck from an indoor floor table.
How far apart should deck joists be?
16 inches on center is standard for most decking. Use 12 inches for diagonal decking, heavy composite boards, or commercial loads; 24 inches only where the decking manufacturer allows it.
How far can a deck joist cantilever past the beam?
Up to one quarter of the adjacent span: a joist spanning 16 ft 6 in between supports may cantilever about 4 ft 1 in past the beam. Longer cantilevers need engineering.
How many joists do I need?
Divide the deck length in inches by the spacing and add 1. A 16-foot deck at 16-inch spacing needs 13 joists; the same deck at 12-inch spacing needs 17.
Does snow load change the span?
Yes. This table assumes 40 psf live load, which covers most decks, but high snow-load regions require shorter spans or larger joists. Your local building department confirms the governing load.