SwiftTools

Cord of Wood Calculator

Enter your stacked woodpile dimensions, and this cord of wood calculator returns the full cords, face cords, cubic feet and cost — using the legal 128 cubic foot cord, so you can check a delivery before you pay for it.

Your wood stack
stack volume (cu ft) = length x height x depth · full cords = volume / 128 · face cord volume = 32 sq ft x log length (ft) · face cords = volume / face cord volume · pieces ≈ cords x 700 (16-in logs) · cost = cords x price per cord

One full cord is the legal firewood unit in most US states: 128 cubic feet of tightly stacked wood (NIST Handbook 130). A face cord (rick) is one 4 by 8 foot face, one log deep — exactly one-third of a full cord only when the logs are 16 inches long. Piece counts are a rule of thumb for split logs; solid wood is only 70 to 85% of stacked volume because of air gaps. This is a planning estimate; measure the stack before you pay.

How the cord of wood calculator works

A full cord is a precisely defined volume, not a weight: 128 cubic feet of tightly stacked wood, the amount in a pile 8 feet long, 4 feet wide and 4 feet high. That definition comes from NIST Handbook 130, the model regulation most US states use for firewood sales. The math is a straight division: multiply the stack length, height and depth in feet for the volume, then divide by 128. Any stack shape counts as long as length times height times depth equals 128 cubic feet.

Worked example: a stack 8 feet long, 4 feet high and 4 feet deep is 128 cubic feet — exactly 1.00 full cord. With 16-inch logs, one face cord (a single 4 by 8 foot face, one log deep) holds 42.67 cubic feet, so the same stack is 3.00 face cords and roughly 700 split pieces. At $350 per cord the stack is worth $350. A smaller stack — 6 by 4 by 4 feet — is 96 cubic feet, or 0.75 of a cord.

Common mistakes: paying full-cord price for a face cord, which is only one-third of the wood at 16-inch logs; measuring a loose pile instead of a stacked one (loose wood reads about 30% bigger than the same wood stacked); and buying green wood by the cord without checking seasoning — green wood weighs roughly half as much again and gives far less heat until it has dried 6 to 12 months. Remember that solid wood is only 70 to 85% of a stacked cord; the rest is air between the splits. The Firewood for Winter Calculator works out how many cords a whole heating season needs.

volume = length x height x depth · full cords = volume / 128 · face cord volume = 32 x log length (ft) · face cords = volume / face cord volume · pieces ≈ cords x 700 (16-in logs) · cost = cords x price per cord

Related tools

Also try the Firewood for Winter Calculator for a whole heating season, the Gravel Calculator for a woodshed base, and the Sand Calculator for volume conversions.

Cord of wood calculator FAQ

How big is a cord of wood?

One full cord is 128 cubic feet of tightly stacked wood — a pile 8 feet long, 4 feet wide and 4 feet high. That is the legal definition in NIST Handbook 130, used by most US states for firewood sales.

How many face cords are in a full cord?

Three face cords make one full cord when the logs are 16 inches long (each face cord is 42.67 cubic feet). At 12-inch logs a face cord is 32 cubic feet, so four make a cord; at 24-inch logs, two make a cord.

How much does a cord of wood weigh?

It depends on species and moisture. Seasoned oak runs about 3,500 to 4,000 pounds per cord; green oak can top 5,000 pounds. Lighter woods like pine weigh far less — which is also why they give less heat per cord.

How many pieces of firewood are in a cord?

Roughly 600 to 800 split pieces at standard 16-inch log length, with 700 the common rule of thumb. Shorter logs mean more pieces per cord; longer logs mean fewer.

How much does a cord of wood cost in 2026?

Seasoned hardwood delivered runs about $275 to $400 per full cord nationally, inside a wider $150 to $575 range depending on region, species and delivery distance. Always compare quotes per full cord, not per face cord or per truckload.

How do I check a delivered cord?

Measure the stacked pile — length times height times depth in feet — and divide by 128. A true 4 by 4 by 8 foot stack is exactly one cord. In most US states firewood must legally be sold by the cord or a fraction of it.

What is the difference between a cord and a rick?

A rick is the same thing as a face cord: one 4 by 8 foot face, one log deep. Its volume depends entirely on log length, so a rick is only one-third of a full cord when the logs are 16 inches long.