SwiftTools

Mortar Calculator

Enter your wall size and project type, and this mortar calculator returns how many bags of premixed mortar to buy — for concrete block, brick, brick veneer or stone veneer — with the coverage figures from the manufacturer data sheets.

Your masonry wall
wall area = length x height · CMU: blocks = area x 1.125, one 80 lb bag lays 13 blocks · brick: bricks = area x 6.75, 1,000 bricks take 19 bags of 60 lb · brick veneer: 7 bags of 80 lb per 100 sq ft · stone veneer: 8 bags of 80 lb per 100 sq ft · bags = ceil(units / per-bag x (1 + waste%))

Coverage follows the Quikrete Mortar Mix No. 1102 data sheet: one 80 lb bag of premixed Type S mortar lays about 13 standard 8 x 8 x 16 in concrete blocks at 3/8 in joints, and a 60 lb bag lays about 10. Brick figures follow the standard trade rule of 19 bags of 60 lb mortar per 1,000 standard bricks at 3/8 in joints; veneer rates are 7 bags of 80 lb per 100 sq ft for brick and 8 for stone. Wider joints use proportionally more mortar. This is a planning estimate — confirm bag counts with your supplier and the mix your engineer specifies.

How the mortar calculator works

Mortar is bought by the bag, and a bag lays a fixed number of units at a standard 3/8 in joint. The Quikrete Mortar Mix No. 1102 data sheet puts one 80 lb bag of premixed Type S mortar at about 13 standard 8 x 8 x 16 in concrete blocks, and a 60 lb bag at about 10. Brick is counted the same way: 1,000 standard bricks take about 19 bags of 60 lb mortar, or about 14 bags of 80 lb. Veneer is priced by area instead: about 7 bags of 80 lb per 100 sq ft for brick veneer and 8 for stone veneer. The calculator counts your units from the wall area — 1.125 blocks or 6.75 bricks per square foot — then divides by the per-bag figure and adds 10% for squeeze-out and board scrapings.

Worked example: a 20 by 8 foot single-wythe block wall is 160 sq ft, or 180 blocks at 1.125 per sq ft. With 10% waste that is 198 blocks, and at 13 blocks per 80 lb bag you buy 16 bags — about $144 at $9 a bag, or 1,280 lb of mix. The same wall in standard brick is 1,080 bricks, needing 1,080 / 1,000 x 19 = 20.5, or 23 bags of 60 lb with waste. As brick veneer it needs 160 / 100 x 7 = 11.2, or 13 bags of 80 lb with waste; as stone veneer, 160 / 100 x 8 = 12.8, or 15 bags.

Common mistakes: counting blocks but forgetting the mortar in the bed joint under the first course (the thickest joint in the wall), using the brick figure for block (a block takes far more mortar per unit than a brick), and ordering exactly the net count with no allowance for squeeze-out — mortar lost to the joints and the mortar board is real, and a half-empty bag at the end of the day is cheaper than a second trip to the store. Premixed bags run about $6 to $12 each in 2026; mixing your own from cement, lime and sand only beats premix past about 25 bags, or 300 blocks. The Brick Calculator counts the bricks themselves, and the Concrete Block Calculator counts blocks and grout fill.

wall area = length x height · blocks = area x 1.125 · bricks = area x 6.75 · 80 lb bag = 13 blocks or 14 bags per 1,000 bricks · 60 lb bag = 10 blocks or 19 bags per 1,000 bricks · veneer: 7 (brick) or 8 (stone) bags of 80 lb per 100 sq ft · bags = ceil(units / per-bag x 1.10)

Related tools

Also try the Brick Calculator for the brick count, the Concrete Block Calculator for blocks and grout, and the Rebar Calculator for the steel in the wall.

Mortar calculator FAQ

How many bags of mortar do I need per 100 bricks?

About 2 to 3 bags of 60 lb mortar per 100 standard bricks at 3/8 in joints — 19 bags per 1,000 bricks. In 80 lb bags that is about 1.4 bags per 100 bricks, or 14 per 1,000.

How much mortar do I need per concrete block?

One 80 lb bag of premixed Type S mortar lays about 13 standard 8 x 8 x 16 in blocks at 3/8 in joints, and a 60 lb bag lays about 10. A 100-block wall needs about 9 bags of 60 lb, or 7 bags of 80 lb, before waste.

How many bags of mortar do I need for a 10-foot block wall?

A 10 ft long by 8 ft tall single-wythe wall is 80 sq ft, or 90 blocks — 95 with 5% waste. At 13 blocks per 80 lb bag that is 8 bags of 80 lb (or 10 bags of 60 lb). Add one extra bag if your first bed joint on the footing runs 1/2 in.

How much mortar does 1,000 bricks need?

About 19 bags of 60 lb premixed mortar, or about 14 bags of 80 lb, laid with 3/8 in joints. Manufacturer bag-coverage figures, which build in mortar lost to squeeze-out, put the same job nearer 36 to 39 bags of 60 lb — order toward that figure unless you are confident about your waste.

What is the difference between Type N and Type S mortar?

Type S is stronger (1,800 psi minimum) and is the standard for concrete block and below-grade work; Type N (750 psi) is the usual choice for above-grade brick veneer and interior masonry. ASTM C270 defines the four types — M, S, N and O — by compressive strength and use.

How much does a bag of mortar cost?

Premixed 60 to 80 lb bags of mortar mix typically run $6 to $12 each in 2026. A 20 by 8 foot block wall needs about 16 bags of 80 lb, or roughly $144 at $9 a bag.

Can I mix my own mortar instead of buying bags?

Yes — a standard Type S site mix is 1 part cement, 1/2 part lime and 4-1/2 parts sand by volume (ASTM C270). It beats premix on price past about 25 bags, or 300 blocks, but needs a mixer, a sand pile and consistent measuring. For small jobs, premix is cheaper once your time is counted.