Wrought Iron Fence Cost Calculator
A wrought iron fence costs about $28–$110 per linear foot installed in 2026 — roughly $2,800–$7,000 for a typical 100 ft run with one gate, depending on style. Enter your fence length, style, and height for a full installed estimate with gates and removal included.
True forged wrought iron is rare today — most "wrought iron" fences are powder-coated steel or aluminum panels built to look the same, at very different prices. The style options above follow that real market: prefab steel panels at the low end, custom fabrication at the top.
Estimates only — not contractor quotes. Slopes, rock, and pool-code requirements change real quotes. Get 2–3 local quotes.
How the wrought iron fence cost calculator works
Iron fences price by the linear foot, and style is the biggest lever. Prefab powder-coated steel panels — what most "wrought iron" fences actually are — install at about $28–$45 per foot. Ornamental work with spear points and scrolls runs $45–$70, and true custom fabrication $70–$110 or more, because a welder is building your fence panel by panel.
Height multiplies the run: 6 ft fences need heavier posts and more steel, so the calculator adds about 15% over the 5 ft baseline, while 4 ft garden fencing comes in about 10% under. Gates are priced per opening at roughly $600 installed for a 4 ft walk gate — wide driveway gates with openers are a separate, much larger line item ($1,500–$4,000+).
Compare this with our other fence pages before choosing: chain link installs for a fraction of iron, while vinyl and wood sit in between. Iron’s case is longevity and security — a galvanized, powder-coated steel fence can outlast the house’s mortgage with only paint touch-ups.
total = length × rate(style, height) + gates × $600 + removal ($5/ft) · panels = ceil(length ÷ 8 ft)
Related tools
Compare materials with the Chain Link Fence Cost Calculator, Vinyl Fence Cost Calculator, and Aluminum Fence Cost Calculator — aluminum mimics iron’s look for less. Size the yard first with the Fence Square Footage Calculator.
Wrought iron fence cost calculator FAQ
How much does a wrought iron fence cost per linear foot?
About $28–$110 per linear foot installed in 2026. Standard prefab steel panels run $28–$45/ft, ornamental styles $45–$70/ft, and custom-fabricated iron $70–$110/ft or more. Height adds roughly 15% going from 5 ft to 6 ft; gates, removal, and difficult terrain add on top.
How much does 100 feet of wrought iron fence cost?
Roughly $2,800–$7,000 installed including one walk gate, depending on style: near $3,400 for standard 5 ft panels with a gate, around $5,700 for ornamental, and $7,600+ for custom work. The calculator above prices your exact length and style.
Is a wrought iron fence worth the cost?
For security, longevity, and curb appeal, often yes. Galvanized steel fencing routinely lasts 30+ years with minimal maintenance, does not rot, warp, or get eaten, and is the hardest common fence to climb or cut. It costs 2–4× chain link — you are paying for decades, not seasons.
What is the difference between wrought iron, steel, and aluminum fencing?
True wrought iron is hand-forged, heavy, and rare in modern residential work. Most "wrought iron" fences sold today are tubular steel — similar look, galvanized and powder-coated against rust. Aluminum is the lightest and cheapest of the three, never rusts, but bends more easily and suits pool and garden duty better than security duty.
Does a wrought iron fence rust?
Unprotected iron rusts quickly, which is why quality panels are galvanized and powder-coated — that system typically holds up 15–20 years before touch-ups. Budget panels with paint-only finishes can show rust at welds and scratches within a few years in wet or coastal climates. Ask any installer exactly what coating the quote includes.
How much does a wrought iron gate cost?
A standard 4 ft walk gate runs about $400–$800 installed. Double driveway gates run $1,200–$3,000, and adding an automatic opener adds $800–$2,500 more depending on power and access controls. This calculator uses $600 per walk gate as a planning figure.
Can I install a wrought iron fence myself?
Prefab panel systems are DIY-able: posts set in concrete, panels bolt between them, and the work is heavy but simple. Rent a two-person auger and a laser level, and expect a weekend per 50 ft with a helper. Custom and ornamental work, slopes, and pool-code gates are where pros earn their fee.