SwiftTools

Shower Square Footage Calculator

Enter your shower floor, tiled wall height, wall layout, openings, waste allowance and box coverage, and this shower square footage calculator returns net tiled area, order area and the number of tile boxes to buy.

Your shower measurements
floor = length x depth · walls: alcove = height x (length + 2 x depth), corner = height x (length + depth), single = height x length · net = floor + walls - openings · order = net x (1 + waste) · boxes = order / box coverage, rounded up

Measure inside faces, from the shower floor (or curb top) to the top of the tile. The 10% waste default covers cuts and breakage for straight layouts; use 15% or more for diagonal or herringbone patterns. Niches, benches, curved walls and returns are not modeled — measure them as extra rectangles and add them to the openings or wall area by hand. This gives area and boxes from box coverage, not a piece count: pieces per box depend on tile size.

How the shower square footage calculator works

A shower is measured wall by wall, not as one room. Floor area is back-wall length times side depth; wall area is height times wall width, summed over the walls you tile — an alcove shower tiles three walls (back wall plus two sides: height x (length + 2 x depth)), a corner shower tiles two (height x (length + depth)), and a feature wall tiles one (height x length). Subtract untiled openings (window, niche face, open entry) and add a waste allowance for cuts and breakage, then divide by your box coverage and round up to whole boxes.

Worked example: a standard 5 x 3 ft alcove shower with 8 ft tiled walls and the floor included has floor 5 x 3 = 15 square feet and walls 8 x (5 + 2 x 3) = 88 square feet, for a net of 103 square feet. With 10% waste the order is 103 x 1.10 = 113.3 square feet, which at 15 square feet per box is 113.3 / 15 = 7.55, rounded up to 8 boxes. Walls alone (no floor) are 88 square feet, ordering 96.8 square feet, or 7 boxes. With a 6-square-foot window deducted, the net is 103 - 6 = 97 square feet, ordering 106.7 square feet, or 8 boxes.

Common mistakes: measuring the bathroom instead of the shower, forgetting the second side wall in an alcove, tiling to the ceiling on paper but only to a showerhead height in reality (measure the height you will actually tile), and skipping waste — straight layouts need about 10%, diagonal or herringbone patterns 15% or more. The general Tile Calculator covers floors and plain walls; this page is the shower-specific version with floor plus walls, openings and boxes in one pass.

net = floor (length x depth, if included) + walls (alcove: height x (length + 2 x depth) / corner: height x (length + depth) / single: height x length) - openings · order = net x (1 + waste) · boxes = ceil(order / box coverage)

Related tools

Also try the Tile Calculator for general floor and wall tile, the Pool Square Footage Calculator for pool area, and the Bathroom Remodel Cost Calculator for the full bathroom budget.

Shower square footage calculator FAQ

How many square feet is a standard shower?

A standard 5 x 3 ft alcove shower with 8 ft tiled walls is 103 square feet including the floor (88 square feet of walls plus 15 square feet of floor), or 88 square feet for walls only.

How do I measure shower walls for tile?

Measure each wall width inside the shower and the height you will actually tile, from the floor or curb top to the top of the tile. Multiply height by width for each wall and add them — this calculator does that from your back-wall length, side depth and wall layout.

How much waste should I add for shower tile?

About 10% for straight layouts and 15% or more for diagonal or herringbone patterns, where cuts multiply. This calculator defaults to 10% and lets you set 0 to 30%.

How many boxes of tile do I need for a shower?

Divide your order area (net area plus waste) by your box coverage and round up. The standard example orders 113.3 square feet, which is 8 boxes at 15 square feet per box.

Do I subtract windows and niches?

Yes — enter their area as openings to deduct. A 6-square-foot window in the standard example drops the net from 103 to 97 square feet. Niches that are themselves tiled need their inside area added back by hand.

Does this include the shower floor?

Only if you select it. Walls-only mode gives 88 square feet for the standard example; including the floor gives 103. Floor tile and wall tile are often different products, so check both coverages.

Does this give a tile piece count?

No — it gives area and boxes from your box coverage. Pieces per box depend on tile size (for example, a 12 x 24 inch tile covers 2 square feet each), so use the box figure when ordering.