Concrete Resurfacer Calculator
A 384 square foot driveway at a thin 1/16 inch coat needs 7 forty-pound bags of resurfacer — 2.2 cubic feet with the usual 10% waste allowance. Enter your slab size and coat thickness below for the exact bags, water and cost.
The yield is the figure on the bag you buy: a 40 lb bag of resurfacer yields about 0.34 cubic feet — about 65 square feet at a 1/16 in skim coat and about 16 square feet at 1/4 in, from Quikrete Re-Cap's data sheet. Thicker than 1/4 in goes on in layers of 1/4 in at most, never in one thick pour. The waste allowance covers a rough, pitted surface that drinks more material, overlap at the joints, and keeping a wet edge. Resurfacer is a thin polymer-modified skim coat over sound concrete — not a structural mix and not a self-leveling underlayment, which has a different yield and a different job.
Recoat only, on sound concrete. Resurfacing renews a worn, pitted or stained slab that is still structurally sound. A slab that is sunken, heaved, cracked through or spalling needs lifting or replacement first — resurfacer will not fix movement, and it will crack where the slab cracks. Planning estimate, not a substitute for professional approval: surface prep, bonding and curing all come from the product data sheet, not this page.
How the concrete resurfacer calculator works
Resurfacer is a cement-based coating spread thin over sound concrete to give it a fresh, even surface, and the bag count is one volume division. Volume is the slab area times the coat thickness in feet, times the number of coats: a 24 by 16 ft driveway is 384 square feet, and at a 1/16 inch skim coat that is 384 x 0.0625 / 12 = 2.00 cubic feet. Add the 10% waste allowance for a rough surface and keeping a wet edge — 2.20 cubic feet — then divide by the yield of one bag and round up. At 0.34 cubic feet per 40 lb bag that is 2.20 / 0.34 = 6.47, so buy 7 bags.
The yield is the number that moves the answer, and it is printed on the bag: a 40 lb bag yields about 0.34 cubic feet, which covers roughly 65 square feet at 1/16 in or 16 square feet at 1/4 in, from Quikrete Re-Cap's data sheet. Coverage quarters each time the thickness doubles, so a thick coat eats bags fast: the same 384 sq ft driveway at 1/4 in is 8.00 cubic feet, 8.80 with waste, or 26 bags — nearly four times the skim-coat count. Thicker than 1/4 in goes on in layers of 1/4 in at most, never in one thick pour, and the second coat goes on while the first is still workable or after it has cured, per the data sheet.
Worked example at a patio scale: a 12 by 24 ft patio is 288 square feet. In two skim coats at 1/16 in that is 288 x 2 = 576 square feet of coverage, and at 65 sq ft per bag that is 576 / 65 = 8.86, so buy 9 bags. Doing it yourself runs about $2 to $5 per square foot all in, against $3 to $7 installed for a resurfacer skim coat — the bags are the cheap part; the prep, the bonding agent and the tools are the rest of the cost.
Resurfacer is not the same product as the other concrete bags on this site, and mixing them up is the most common ordering mistake. Bagged concrete mix is structural — it builds a slab. Self-leveling compound is an underlayment for indoor floors before tile, vinyl or carpet, with a yield of about 0.45 cubic feet per 50 lb bag. Resurfacer is the thin polymer-modified skim coat for renewing a worn outdoor slab, at 0.34 cubic feet per 40 lb bag. Each page counts its own product; use the yield printed on the bag you actually buy.
Common mistakes: resurfacing a slab that moves — sunken, heaved or cracked through — which the resurfacer will not fix and will crack along with; skipping the prep, which is most of the job (pressure-wash, etch or grind, and bond); and pouring on a hot, sunny day, when the mix sets before you can finish it and the edge dries. Work in the cool of the morning, keep a wet edge, and seal the surface afterwards: a sealed resurface lasts years longer than a bare one.
volume = area x thickness / 12 x coats · bags = ceil(volume x (1 + waste) / yield per bag) · 40 lb bag = 0.34 cu ft: 65 sq ft at 1/16 in, 16 sq ft at 1/4 in · layers of 1/4 in at most
Related tools
Seal the finished surface with the Concrete Sealer Calculator. Leveling an indoor floor instead? Count underlayment bags with the Self-Leveling Concrete Calculator. Pouring a new slab? Use the Concrete Slab Calculator and the Concrete Bags Calculator.
Concrete resurfacer calculator FAQ
How many bags of concrete resurfacer do I need?
Multiply the area by the coat thickness in feet, add waste, and divide by the yield of one bag. A 384 sq ft driveway at 1/16 in is 2.00 cu ft, 2.20 with 10% waste, and at 0.34 cu ft per 40 lb bag that is 6.47 — buy 7 bags.
How far does one bag of concrete resurfacer go?
About 65 square feet at a 1/16 in skim coat, 32 at 1/8 in, 16 at 1/4 in and 8 at 1/2 in (40 lb bag, 0.34 cu ft). Coverage quarters each time the thickness doubles, so a thick coat eats bags fast.
How thick can I apply concrete resurfacer?
From a 1/16 in featheredge to 1/2 in, in layers of 1/4 in at most — never in one thick pour. A broom or squeegee skim coat is about 1/16 in; thicker repairs go up to 1/2 in in two layers.
Can I resurface a cracked concrete driveway?
Only if the slab is sound and the cracks are surface cracks. A slab that is sunken, heaved or cracked through will move again, and the resurfacer will crack where the slab cracks. Lift or replace a moving slab first.
Is resurfacer the same as self-leveling concrete?
No — resurfacer is a thin polymer-modified skim coat for renewing worn outdoor slabs (0.34 cu ft per 40 lb bag), while self-leveling compound is an underlayment for indoor floors before tile, vinyl or carpet (about 0.45 cu ft per 50 lb bag). Different product, different yield, different job.
How much water does resurfacer need?
About 2 1/2 to 3 quarts per 40 lb bag, from the data sheet. Measure it — too much water weakens the coat and too little stops it spreading. The calculator adds the water up for the bags it counts.
How much does it cost to resurface a concrete driveway?
Doing it yourself runs about $2 to $5 per square foot all in, against $3 to $7 installed for a skim coat. The bags are the cheap part: a 384 sq ft driveway needs 7 bags, about $140 at $20 a bag — prep, bonding agent and tools are the rest.