SwiftTools

Landscape Fabric Calculator

Enter your bed size and roll size, and this landscape fabric calculator returns the rolls to buy, the staples to pin it down — edges, seams and interior — and the cost, with the overlap the seams actually need.

Your garden bed
area (sq ft) = length x width · fabric to buy = area x (1 + overlap%) · rolls = ceil(fabric to buy / roll area) · edge staples = perimeter in inches / spacing · seam staples = seam length in inches / spacing · interior staples = area / 4 sq ft (standard) or / 2 (secure) · overlap seams 6 to 12 in at every joint

Industry practice is a 6 to 12 inch overlap at every seam so weeds cannot grow through the gaps, and 10 to 15% extra fabric for that overlap and cutting waste. Standard staple spacing is every 8 to 12 inches along exposed edges and seams, plus one interior staple every 3 to 4 square feet; use the secure spacing — about every 6 inches on edges and seams and one staple every 1.5 to 2 square feet inside — for loose soil, slopes, curves or windy spots. On a slope, double the staple count so the fabric does not slide. This is a planning estimate; confirm roll widths with your supplier before ordering.

How the landscape fabric calculator works

Landscape fabric is sold by the roll and laid in strips, so the math has three parts. First the area: length times width, plus 10 to 15% for the 6 to 12 inch overlap every seam needs so weeds cannot grow through the gaps, and for cutting waste. Divide by the roll area — a standard 3 by 100 foot roll covers 300 sq ft — and round up to whole rolls. A bed is covered in strips as wide as the roll, so an 8 foot wide bed needs 3 strips of 3 foot fabric, with 2 seams down its length.

Worked example: a 20 by 8 foot bed is 160 sq ft. With 10% overlap that is 176 sq ft to buy, or 1 roll of 3 by 100 feet. Staples at standard spacing — every 12 inches on edges and seams, one interior staple per 4 sq ft — are 56 on the 56 foot perimeter, 40 on the 40 feet of seam, and 40 inside: 136 staples in all. At $25 a roll and $0.10 a staple the job costs $38.60. The same bed at secure spacing for a slope is 112 edge, 80 seam and 80 interior staples: 272 in all.

Common mistakes: buying exactly the bed area with no overlap allowance (the seams alone eat 10% on a multi-strip bed), pinning only the edges (the middle of a wide sheet lifts in wind and lets weeds through — interior staples every 3 to 4 sq ft hold it flat), and using 6-inch staples in loose or sandy soil (they pull out; 9 or 12 inch staples reach stable ground). On a slope, double the staple count: gravity and runoff slide unpinned fabric downhill. The Mulch Calculator sizes the mulch or stone that goes on top, and the Topsoil Calculator sizes the soil underneath.

area = length x width · buy = area x 1.10 · rolls = ceil(buy / roll area) · strips = ceil(width / roll width) · edge staples = perimeter / 1 ft · seam staples = seam length / 1 ft · interior staples = area / 4 sq ft (standard) or / 2 (secure) · overlap seams 6 to 12 in

Related tools

Also try the Mulch Calculator for the cover on top, the Topsoil Calculator for the soil underneath, and the Raised Bed Soil Calculator for raised beds.

Landscape fabric calculator FAQ

How many rolls of landscape fabric do I need?

Divide your bed area plus 10 to 15% for overlap by the roll area and round up. A 20 by 8 foot bed is 160 sq ft, 176 with overlap — 1 roll of 3 by 100 feet (300 sq ft). A 40 by 20 foot bed is 800 sq ft, 880 with overlap — 3 rolls of 3 by 100 feet.

How many landscape staples do I need?

At standard spacing — every 12 inches on edges and seams, one interior staple per 4 sq ft — a 20 by 8 foot bed needs 136 staples: 56 edge, 40 seam and 40 interior. Use secure spacing (every 6 inches, one per 2 sq ft) on slopes and loose soil, which doubles it to 272.

How much should landscape fabric overlap?

Six to 12 inches at every seam, so weeds cannot grow through the gaps between strips. The 10 to 15% extra fabric in this calculator covers that overlap plus cutting waste.

What size landscape fabric rolls can I buy?

The common retail roll is 3 feet wide by 100 feet long (300 sq ft), with 3 by 50, 4 by 100 and 6 by 300 foot rolls also sold. Wider rolls mean fewer seams on a wide bed — a 6 foot roll covers an 8 foot bed in 2 strips instead of 3.

How far apart should landscape fabric staples be?

Every 8 to 12 inches along exposed edges and seams, plus one interior staple every 3 to 4 square feet, for a flat bed that will be covered with mulch or stone. Use about every 6 inches on edges and seams and one staple every 1.5 to 2 square feet inside for loose soil, slopes, curves or windy spots.

Do I need landscape fabric under mulch?

It helps in beds where weeds are the problem: fabric under 2 to 3 inches of mulch blocks most weeds while letting water through. Skip it under trees and shrubs that need root spread, and never use plastic sheeting — it traps water and suffocates the soil.

How long does landscape fabric last?

Woven landscape fabric typically lasts 10 to 15 years under mulch; lighter spun-bond fabric lasts 3 to 5 years. UV exposure is what kills it, so keep it covered with mulch or stone and it lasts the life of the bed.