SwiftTools

Rebar Calculator

Enter your slab size, bar spacing and bar size, and this rebar calculator returns the bar count in each direction, total linear feet, weight in pounds and tons, and how many 20-foot stock bars to buy — with lap splices and waste included.

Your slab rebar grid
bars each way = ceil(span in inches / spacing) + 1 · total linear feet = bars x span, both directions · order = linear feet x (1 + waste%) · weight = order x lb per foot (ASTM A615) · stock bars = ceil(order / stock length) · lap splice = 40 x bar diameter when a run exceeds one stock length

Bar counts follow the standard slab takeoff: bars each way is the span divided by spacing plus one, and linear footage is counted on the full span before cutting to the cover line. Rebar is sold in 20-foot sticks; when a run exceeds one stick, bars are lapped 40 bar diameters (20 inches for #4). #4 at 0.668 lb per foot is the standard choice for 4-inch residential slabs. Typical spacing is 12 inches on-center for standard slabs, 18 inches for lightly loaded patios, and 8 inches for driveways or structural slabs. This tool counts and weighs steel; it does not design it — bar size, spacing and cover are set by your drawings or local code. Verify the bar list with your detailer before ordering.

How the rebar calculator works

A slab rebar grid is counted in two directions. Bars each way is the span in inches divided by the on-center spacing, rounded up, plus one for the starter bar — the standard takeoff used across estimator guides. Total linear feet is bars times span in both directions, counted on the full span before cutting to the cover line. Add 10% for lap splices and off-cuts, multiply by the ASTM A615 weight per foot (#3 0.376, #4 0.668, #5 1.043, #6 1.502 lb per foot) for the weight, and divide the ordered footage by the 20-foot stock length, rounded up, for the bars to buy. When a run exceeds one stock length, bars are lapped 40 bar diameters — 20 inches for #4, 25 inches for #5.

Worked example: a 20 by 20 foot garage slab, #4 rebar at 12 inches on-center, 3 inches of cover, 10% waste. Bars each way are ceil(240 / 12) + 1 = 21, so 42 bars in the grid. Total linear feet is 21 x 20 + 21 x 20 = 840 feet; with 10% waste that is 924 feet, weighing 924 x 0.668 = 617 lb (0.31 tons), and you buy ceil(924 / 20) = 47 twenty-foot sticks. At $0.70 per foot the steel costs $646.80. A 10 by 10 foot patio slab the same way needs 11 bars each way — 22 bars, 220 linear feet, 242 with waste, 162 lb, 13 sticks. A 30 by 40 foot slab at 18 inches needs 27 by 21 bars, 1,650 linear feet net (1,815 with waste), about 1,212 lb, 91 sticks.

Common mistakes: forgetting the plus-one starter bar in each direction (the count comes up one short per row), counting bars on the net span after cover instead of the full span (the takeoff convention counts full span), and ordering exactly the net footage with no lap or waste allowance — a 20-foot slab with a 10% lap allowance needs each bar effectively 22 feet long. #4 (1/2 inch) is the standard choice for 4-inch residential slabs; #3 suits light-duty patios and #5 structural work. Spacing of 12 inches on-center is the residential default, 18 inches for lightly loaded patios, 8 inches for driveways. The Concrete Slab Cost Calculator prices the concrete this steel goes into.

bars each way = ceil(span in inches / spacing) + 1 · linear feet = bars x span, both directions · order = linear feet x (1 + waste%) · weight (lb) = order x lb per foot · stock bars = ceil(order / stock length) · lap = 40 x bar diameter

Related tools

Also try the Concrete Slab Cost Calculator for the concrete, the Concrete Block Calculator for block work, and the Post Hole Concrete Calculator for footings.

Rebar calculator FAQ

How much rebar do I need for a 20x20 slab?

With #4 bars at 12 inches on-center: 21 bars each way, 42 bars total, 840 linear feet net — 924 feet with 10% waste, about 617 lb, or 47 twenty-foot sticks.

What spacing should I use for slab rebar?

Twelve inches on-center is the residential default for 4-inch slabs, 18 inches for lightly loaded patios, and 8 inches for driveways, garage floors or structural slabs. Your drawings or local code set the final spacing.

What size rebar do I need for a concrete slab?

#4 (1/2 inch, 0.668 lb per foot) is the standard choice for 4-inch residential slabs including garage floors and driveways. #3 suits light-duty patios; #5 is for structural work.

What is a lap splice in rebar?

When a run exceeds one 20-foot stock bar, two bars are overlapped by 40 times the bar diameter — 20 inches for #4, 25 inches for #5 — so the steel works as one continuous bar. This calculator folds laps into the 10% waste allowance.

How much does rebar weigh?

By ASTM A615: #3 is 0.376 lb per foot, #4 is 0.668, #5 is 1.043 and #6 is 1.502. A 20x20 slab at 12-inch spacing with #4 weighs about 617 lb with waste.

How many 20-foot sticks of rebar do I need?

Divide the ordered linear footage (net plus waste) by 20 and round up. A 20x20 slab ordering 924 feet needs 47 sticks; a 10x10 patio ordering 242 feet needs 13.

How much does rebar cost?

About $0.50 to $0.90 per linear foot for #4, or $10 to $18 per 20-foot stick. A 20x20 slab at $0.70 per foot costs about $647 in steel.