Recessed Lighting Installation Cost Calculator
Enter how many lights, their fixture type, the wiring situation and switch extras, and this recessed lighting cost calculator returns an itemized estimate — fixtures, labor and extras — with a per-light price to compare against quotes.
Fixture prices sit inside published bands (basic LED retrofit kits about $15 to $40, premium and smart trims higher) and labor sits inside the published $100 to $300 per light band for retrofit work, with new wiring runs toward $300 per light and beyond. Permits ($50 to $200 where required), panel upgrades and ceiling repair beyond the fixture cutout are not included. This prices installation; the How Many Recessed Lights Calculator sizes how many fixtures a room needs.
How the recessed lighting cost calculator works
Recessed lighting is priced per light: the fixture plus the labor to cut, wire and trim it. This calculator uses $25 for a basic LED retrofit, $60 for a premium trim and $90 for a smart or tunable LED, with labor of $150 per light for a retrofit on an existing circuit and $300 per light for a new wiring run — inside published bands (fixtures about $15 to $40 basic, labor about $100 to $300 per light). A dimmer switch adds a flat $125, a new dedicated circuit a flat $450, or both $575.
Worked example: six basic LED retrofits on an existing circuit cost 6 x ($25 + $150) = $1,050 — inside the published $900 to $3,600 band for a six-light project. Eight basic retrofits cost 8 x $175 = $1,400, inside the published $1,200 to $2,400 band for a typical eight-light kitchen. Eight premium trims with new wiring and a dimmer cost 8 x ($60 + $300) + $125 = $3,005.
Common mistakes: counting fixtures from a layout tool and pricing them as retrofit when the room has no existing fixture locations (that is new-wiring work, about double the labor), forgetting the dimmer or circuit as a flat extra, and comparing a fixture-only price against an installed price. Running cost is small by comparison: six 10-watt LEDs at 5 hours a day cost about $18 a year at average rates. This page prices installation; the How Many Recessed Lights Calculator sizes the fixture count from room dimensions.
total = lights x (fixture ($25 basic / $60 premium / $90 smart) + labor ($150 retrofit / $300 new wiring)) + extras ($0 / $125 dimmer / $450 circuit / $575 both)
Related tools
Also try the How Many Recessed Lights Calculator for fixture counts, the Ceiling Fan Installation Cost Calculator for fan work, and the What Size Wire Calculator for circuit sizing.
Recessed lighting cost calculator FAQ
How much does it cost to install recessed lighting?
About $150 to $600 per light installed. In this calculator, six basic LED retrofits on an existing circuit cost $1,050 ($175 per light); eight premium trims with new wiring and a dimmer cost $3,005.
How much does a 6-light recessed project cost?
About $900 to $3,600 for six lights, depending on fixture and wiring. This calculator prices six basic retrofits at $1,050 and six premium trims with new wiring at $2,160 before extras.
Is retrofit or new wiring cheaper?
Retrofit is much cheaper: $150 labor per light versus $300 for a new wiring run, because the electrician works from below the finished ceiling instead of running new cable through framing. Rooms with no existing fixture locations need new wiring.
How much does a dimmer switch add?
This calculator adds a flat $125 for a dimmer switch. Smart dimmers and multi-location dimming cost more and may need compatible LED fixtures.
Do I need a new circuit for recessed lights?
Not usually for a few LED retrofits on an existing lighting circuit — LEDs draw little power. A new dedicated circuit (flat $450 here) is needed when the existing circuit is full, the panel has no capacity, or code requires it.
How much does recessed lighting cost to run?
Very little: six 10-watt LEDs at 5 hours a day cost about $18 a year at average electricity rates. The install cost dominates; the running cost is a rounding error by comparison.
Is this estimate a contractor quote?
No — it is a planning estimate from published fixture and labor bands. Attic access, ceiling material, circuit capacity and local electrician rates move the final price, so compare it against two or three local quotes.