SwiftTools

Driveway Sealcoating Cost Calculator

Enter your driveway size, the number of coats and the sealer type, and this driveway sealcoating cost calculator returns the gallons to buy, the DIY material cost, crack filling, and the professional price range.

Your driveway sealcoating job
area = length x width · gallons = area x coats / coverage x 1.05 waste · DIY material = gallons x price per gallon · professional = area x $0.15 to $0.30 per sq ft (asphalt-based) · crack fill = linear feet x $2 per foot

Coverage is the input to watch: asphalt-based emulsion covers about 80 square feet per gallon per coat, and a porous or oxidized surface can take a quarter more sealer than one sealed two years ago. Bulk-mixed sealer runs $1.50 to $3.00 per gallon; concentrate runs $4 to $8 per gallon. Hired sealcoating averages $0.15 to $0.30 per square foot for asphalt-based and $0.20 to $0.40 for coal tar, with a $150 to $350 contractor minimum. Reseal every 2 to 3 years, and never seal new asphalt before it cures for 6 to 12 months. This is a planning estimate — compare it against local quotes.

How the driveway sealcoating cost calculator works

Sealcoat is sold by the gallon, and the coverage rate decides everything: gallons equals area times coats divided by coverage per gallon, plus 5% for waste on irregular shapes. Asphalt-based emulsion — the most common residential choice — covers about 80 square feet per gallon per coat; mixed coal-tar sealer covers about 100; a rough or porous surface can take a quarter more sealer, so 60 square feet per gallon is the safe preset there. DIY material is gallons times the price per gallon ($1.50 to $3.00 for bulk-mixed sealer, $4 to $8 for concentrate). Professional work runs $0.15 to $0.30 per square foot for asphalt-based and $0.20 to $0.40 for coal tar, with a $150 to $350 contractor minimum that dominates small driveways.

Worked example: a 50-foot by 30-foot driveway is 1,500 square feet. Two coats of asphalt emulsion at 80 square feet per gallon need 1,500 x 2 / 80 = 37.5 gallons, plus 5% waste = 39.4, rounded up to 40 gallons. At $2.25 per gallon the DIY material is $90. Hired, the same driveway costs 1,500 x $0.15 to $0.30 = $225 to $450. Add 50 linear feet of crack filling at $2 per foot and the DIY total is $190, the professional total $325 to $550. A two-car 800-square-foot driveway needs about 21 gallons for two coats and costs $240 to $480 professionally.

Common mistakes: sealing new asphalt before it cures (wait 6 to 12 months), sealing over cracks instead of filling them first (water gets under the new coat), and resealing every year — every 2 to 3 years is right; earlier is wasteful and later lets surface damage set in. Coal tar is the cheapest and most UV- and chemical-resistant sealer but is banned in some states and counties, so check local rules. Two coats are standard; a third coat adds protection on high-traffic areas but not much on a residential driveway. The House Pressure Washing Cost Calculator prices the cleaning that should come first.

area (sq ft) = length x width · gallons = ceil(area x coats / coverage x 1.05) · DIY material = gallons x price per gallon · professional = area x $0.15 to $0.30 per sq ft, minimum $150 to $350 · crack fill = linear feet x $1 to $3 per foot

Related tools

Also try the House Pressure Washing Cost Calculator for the cleaning before sealing, the Gravel Calculator for driveway base material, and the Paver Calculator for a paved alternative.

Driveway sealcoating cost calculator FAQ

How many gallons of sealer do I need?

Area times coats divided by coverage per gallon, plus 5% waste. A 1,500-square-foot driveway with two coats of asphalt emulsion at 80 square feet per gallon needs 40 gallons.

How much does driveway sealcoating cost?

Professionally, $0.15 to $0.30 per square foot for asphalt-based sealer — a typical 1,500-square-foot residential driveway costs $225 to $450. DIY material for the same driveway is about $90 in bulk-mixed sealer.

How often should I sealcoat my driveway?

Every 2 to 3 years for residential driveways. Resealing earlier is usually wasteful; later than that lets UV, water and freeze-thaw damage set in, which costs more to repair than the sealcoat saved.

Can I sealcoat a new asphalt driveway right away?

No — new asphalt needs 6 to 12 months to cure before the first sealcoat, or the sealer will not bond and can trap oils in the fresh asphalt.

Should I fill cracks before sealcoating?

Yes — always fill cracks before sealing, never after. Crack filling runs $1 to $3 per linear foot for cracks over 1/8 inch wide, and sealing over an open crack lets water under the new coat.

What is the difference between asphalt emulsion and coal tar sealer?

Asphalt emulsion covers about 80 square feet per gallon per coat and is widely accepted; coal tar is cheaper, more UV- and chemical-resistant, and covers about 100 square feet per gallon — but it is banned in some states and counties.

Why is there a minimum charge for professional sealcoating?

The crew, truck and setup cost the same however small the driveway, so most pros charge a $150 to $350 minimum. On a small driveway the minimum, not the per-square-foot rate, sets the price.