Blown-In Insulation Calculator
Enter your attic area, the insulation already there and the R-value you want, and this blown-in insulation calculator returns the bags to buy and the depth to blow — read straight off the coverage charts the manufacturers print on the bag.
Bag counts come from the coverage charts the manufacturers print on the bag — the FTC R-value Rule requires them — not from a generic formula, so the two materials give very different bag counts for the same R-value: the bags are different sizes. Blower rental is often free with 10 to 20+ bags; otherwise about $100 to $200 a day. Cellulose settles about 10% after install; fiberglass settles under 2%.
How the blown-in insulation calculator works
Bag counts come from the manufacturer coverage charts, not from a generic formula. Every bag of blown-in insulation carries a chart under the FTC R-value Rule: for a given R-value it states the bags per 1,000 square feet and the installed depth. The calculator first works out the R-value to add — your target minus what is already there — then takes the first chart row at or above that number (charts list fixed R-values, so R-41 rounds up to the R-44 or R-49 row), and scales the bags by your area. Owens Corning AttiCat fiberglass (27.5-pound bag) takes 26 bags per 1,000 square feet at R-49, blown 17 inches deep; GreenFiber cellulose (19.05-pound bag) takes 84 bags at the same R-value, blown 15.2 inches deep. The bag counts differ because the bags are different sizes — compare cost, not bag count.
Worked example: a 1,000-square-foot attic with nothing in it, taken to R-49 with blown cellulose, needs 84 bags off the GreenFiber chart (INS541LD), blown 15.2 inches deep and settling to about 13.7 inches. With the default 5% cushion that is 89 bags. The same attic in AttiCat fiberglass needs 26 bags at 17 inches deep. If the attic already has 4 inches of old fiberglass — about R-10 — topping up to R-49 means adding R-39, which rounds up to the R-49 chart row, so the bag count is the same; only a much higher existing R-value drops you to a lower chart row.
Common mistakes: comparing bag counts across materials (a cellulose bag and a fiberglass bag hold different volumes, so 84 cellulose bags and 26 fiberglass bags can be the same job); using the installed depth as the settled depth (cellulose settles about 10% after install, so 15.2 inches blown becomes about 13.7 settled, while fiberglass settles under 2%); and ignoring the blower — most big-box stores lend the machine free with 10 to 20 or more bags, otherwise about $100 to $200 a day. Energy Star attic targets are roughly R-30 in hot Zone 1, R-49 across most of the country, and R-60 in the coldest northern zones. The Insulation Cost Calculator prices the whole job, installed.
R to add = target R - existing R · bags = ceil(area / 1,000 x bags per 1,000 sq ft at the first chart R at or above R to add x (1 + waste%)) · AttiCat R-49: 26 bags/1,000 sq ft, 17 in · GreenFiber R-49: 84 bags/1,000 sq ft, 15.2 in
Related tools
Also try the Insulation Cost Calculator for the installed price, the Spray Foam Insulation Cost Calculator for the foam alternative, and the House Wrap Calculator for the wall barrier.
Blown-in insulation calculator FAQ
How many bags of blown-in insulation do I need for 1,000 sq ft?
To reach R-49 from an empty attic: about 84 bags of GreenFiber cellulose blown 15.2 inches deep, or 26 bags of Owens Corning AttiCat fiberglass blown 17 inches deep. The counts differ because the bags are different sizes — compare cost, not bag count.
Why does cellulose need so many more bags than fiberglass?
The bags hold different volumes: a GreenFiber cellulose bag is 19.05 pounds and covers about 12 square feet at R-49, while an AttiCat fiberglass bag is 27.5 pounds and covers about 40. Same R-value, different packaging — the cost per square foot is what matters.
What R-value should my attic insulation be?
Energy Star recommends roughly R-30 in hot Zone 1, R-49 across most of the country (Zones 2 to 6), and R-60 in the coldest northern zones. Check your IECC climate zone; this calculator fills the target from it.
What is the difference between installed and settled depth?
Installed depth is what you blow; settled depth is what remains after the material compresses. Cellulose settles about 10% — 15.2 inches blown becomes about 13.7 settled — while fiberglass settles under 2%. The chart depth is the installed depth you measure while blowing.
Do I subtract the insulation already in my attic?
Yes — the calculator takes your target R-value minus the existing R-value and counts bags for the difference. Four inches of old fiberglass is about R-10; topping up to R-49 from there still rounds up to the R-49 chart row.
Do I need a blower machine for blown-in insulation?
Yes — blown-in insulation needs a blowing machine. Most big-box stores lend one free with 10 to 20 or more bags; otherwise rental runs about $100 to $200 a day. The machine type matters: the AttiCat chart assumes the AttiCat machine.
How much does blown-in insulation cost per bag?
A 25- to 30-pound bag of blown-in cellulose or fiberglass typically runs about $10 to $15 at big-box stores, though prices vary by store and region. Enter your local price per bag and the calculator totals the material cost.