Stump Grinding Cost Calculator
Enter how many stumps, their average diameter, the per-inch rate, grind depth and cleanup, and this stump grinding cost calculator returns an itemized estimate — first stump, discounted extra stumps and cleanup — with the minimum call-out applied.
Per-inch rates run about $3 to $7 in standard markets and $4 to $10 in high-cost metros, with a minimum call-out of about $100 to $150 — this calculator uses a $125 floor. Additional stumps on the same visit run about 50% to 70% of the first stump (60% used here) because the grinder is already on site. Grinding leaves the root system in the ground and produces wood chips; full dig-up removal, stump replacement fill and re-sodding cost more and are not included. Renting a grinder runs about $175 to $350 a day as an alternative for experienced operators.
How the stump grinding cost calculator works
Stump grinding is priced per diameter inch, measured across the widest point at ground level. This calculator uses $3 per inch for rural or small markets, $4.50 for standard markets and $6 for metro markets — inside the published $3 to $7 standard band ($4 to $10 in high-cost metros) — multiplied by a depth factor: 1.0 for a surface grind, 1.3 for the standard 6 to 8 inches below grade, and 1.6 for a deep grind of 12 inches or more. Extra stumps on the same visit cost 60% of the first (published multi-stump range 50% to 70%), cleanup adds $25 per stump when chips are hauled away, and the total never falls below a $125 minimum call-out (published $100 to $150).
Worked example: one 24-inch stump at the standard $4.50 rate, standard depth and cleanup costs 24 x $4.50 x 1.3 = $140.40 for grinding plus $25 cleanup = $165.40. Two 24-inch stumps the same way cost $140.40 + (0.6 x $140.40 = $84.24) + $50 cleanup = $274.64. One 36-inch stump with a deep grind at the $6 metro rate and cleanup costs 36 x $6 x 1.6 = $345.60 + $25 = $370.60. A small 12-inch surface grind at $3 with chips left on site costs 12 x $3 x 1.0 = $36, raised to the $125 minimum.
Common mistakes: measuring diameter at the cut top instead of the widest root flare at ground level, forgetting the minimum charge on a single small stump, and comparing a grinding quote against a full removal quote (digging out the stump and roots costs substantially more). Grinding time grows with cross-sectional area, not diameter alone — a 24-inch stump takes roughly four times as long as a 12-inch one — which is why deep, wide and hardwood stumps jump in price. This page prices grinding only; the Tree Removal Cost Calculator prices taking the tree down.
first = diameter (in) x rate ($3 / $4.50 / $6 per inch) x depth (1.0 surface / 1.3 standard / 1.6 deep) · total = max($125, first + 0.6 x first x (stumps - 1) + $25 x stumps if cleanup)
Related tools
Also try the Tree Removal Cost Calculator for taking the tree down, the Lawn Mowing Cost Calculator for ongoing yard work, and the Retaining Wall Cost Calculator for landscape structures.
Stump grinding cost calculator FAQ
How much does stump grinding cost per stump?
About $100 to $400 per stump for typical sizes. In this calculator, one 24-inch stump at standard depth costs $165.40 with cleanup, and two the same way cost $274.64.
How much does stump grinding cost per inch?
About $3 to $7 per diameter inch in standard markets and $4 to $10 in high-cost metros. This calculator uses $3, $4.50 or $6 per inch, multiplied by the depth factor.
Why is there a minimum charge?
The grinder, truck and operator must travel to the site whatever the stump size, so companies charge a minimum call-out of about $100 to $150. This calculator applies a $125 floor — a small surface grind priced at $36 is raised to $125.
Are extra stumps cheaper?
Yes — extra stumps on the same visit run about 50% to 70% of the first stump, because setup and travel are already paid. This calculator uses 60%: a second 24-inch stump adds $84.24 instead of $140.40.
How does grind depth change the price?
Standard grinding goes 6 to 8 inches below grade (factor 1.3 here); a deep grind of 12 inches or more takes far longer and costs about 60% more than a surface grind (factor 1.6). Choose deep only when the area must be replanted or built over.
What happens to the wood chips?
Grinding produces a pile of chips mixed with soil. Leaving them on site costs nothing; hauling them away adds $25 per stump here. Chips can also be used as mulch once aged, but fresh chips should not be piled against tree trunks.
Is this estimate a contractor quote?
No — it is a planning estimate from published per-inch rates and minimum charges. Wood hardness, root spread, access (gate width, slopes, buried utilities) and local rates move the final price, so compare it against two or three local quotes.