Crushed Stone Driveway Calculator
A standard 100 by 10 foot driveway at 6 inches deep needs 18.5 cubic yards of crushed stone — 25.9 tons, about $907 at $35 a ton before waste. Enter your driveway size and layer depths below for the full layered takeoff, including the 15% driveway waste allowance.
Density is 1.40 short tons per cubic yard (2,800 lb/yd³) for crushed stone — the figure most driveway calculators use. Quarries vary by rock type and moisture, so confirm your supplier's number before a big order. A full build is geotextile fabric on prepared subgrade, then 4–6 inches of base rock (#3 stone or crusher run), then a 2–3 inch top course of #57 stone.
Estimates only — not a quote. Delivered prices typically run $30–$50 per ton depending on region and stone type. Pea gravel is the wrong stone for a driveway — rounded stone shifts under vehicles; use angular crushed stone, which locks together.
How the crushed stone driveway calculator works
A gravel driveway is a layered system, not a single pour of stone. The standard full build is geotextile fabric laid on prepared subgrade, then 4 to 6 inches of base rock (typically #3 stone or crusher run), then a 2 to 3 inch top course of #57 stone — clean, angular aggregate about 1 to 1.5 inches across that drains well and locks up tight. Total depth for a new driveway is usually 6 to 9 inches, and this calculator prices each layer separately so you can order base and top stone by the truckload.
Volume is length x width x depth, divided by 27 for cubic yards. Tons come from the density of crushed stone, 1.40 short tons per cubic yard (2,800 lb), which is the figure most driveway calculators use. A 100 x 10 ft drive at 6 inches total is 18.5 cubic yards and 25.9 tons before waste; at $35 a ton that is $907 of stone. The calculator then adds your waste allowance — 15% for driveways, which need more than patios because vehicles compact the stone and edges spread.
Worked example: a double-car 20 x 20 ft driveway at 5 inches deep is 400 x (5 / 12) / 27 = 6.2 cubic yards, or 8.6 tons at 1.40 tons per yard. With the 15% driveway allowance, order 7.1 cubic yards and about 9.9 tons. (One popular calculator quotes 9.3 tons and 10.7 to order for the same drive — it uses a heavier 1.50 tons-per-yard density; the difference is a reminder to confirm your quarry's number.) A short single-car drive, 50 x 10 ft at 6 inches, needs 9.3 cubic yards and 13.0 tons before waste.
Common mistakes: ordering one depth for the whole build instead of splitting base and top stone — they are different products at different prices; skipping the geotextile, which lets the base sink into mud within a season; and using pea gravel on a driveway, which is rounded, does not lock together, and shifts under vehicle weight. Measure curved drives in straight segments and use the total length with an average width.
volume (yd³) = length x width x depth (in) / 12 / 27 · tons = yd³ x 1.40 (2,800 lb/yd³) · order = volume x (1 + waste) · cost = tons x $/ton
Related tools
For loose stone anywhere else, use the Gravel Calculator or the Pea Gravel Calculator; for the apron, the Concrete Slab Cost Calculator and the Asphalt Cost Per Square Foot Calculator.
Crushed stone driveway calculator FAQ
How much crushed stone do I need for a driveway?
Multiply length by width by total depth in feet, divide by 27 for cubic yards, then multiply by 1.40 tons per cubic yard and add 15% for compaction and edges. A 100 x 10 ft drive at 6 inches needs 18.5 cubic yards — 25.9 tons before waste, about 29.8 tons to order.
How deep should a crushed stone driveway be?
6 to 9 inches total for a new build: 4 to 6 inches of base rock (#3 stone or crusher run) plus 2 to 3 inches of #57 top stone. A top-dressing refresh on an existing solid drive needs only 2 to 4 inches of new top stone.
How many tons of crushed stone per cubic yard?
About 1.40 short tons (2,800 lb) per cubic yard for crushed stone. Some calculators use 1.50 — the difference comes from rock type and moisture, so confirm your quarry's scale weight before a large order.
What is the best crushed stone for a driveway?
#57 stone (about 1 to 1.5 inch clean, angular aggregate) for the top course, over #3 stone or crusher run for the base. Angular stone locks together under tires; rounded stone like pea gravel shifts and ruts.
How much does a crushed stone driveway cost?
Material typically runs $30–$50 per ton delivered, so a 100 x 10 ft drive at 6 inches costs about $900–$1,300 in stone before waste, plus delivery and grading. A full build with fabric, base, and top stone usually lands around $1.50–$3.00 per square foot installed.
How much does one ton of crushed stone cover?
At 1.40 tons per cubic yard, one ton covers about 100 square feet at 1 inch deep, 50 at 2 inches, 33 at 3 inches, and about 25 at 4 inches. A 20 x 20 ft drive at 5 inches needs about 9 to 10 tons with waste.
Do I need landscape fabric under a gravel driveway?
Yes — geotextile fabric under the base layer is the cheapest insurance in the whole build. It keeps the base stone from sinking into the subgrade, so the driveway stays firm instead of turning to mud in the first wet season. Order the driveway area in square feet, plus 10% for overlaps.