SwiftTools

Solar Panel Output Calculator

Enter your panel count, wattage, peak sun hours and system efficiency, and this solar panel output calculator returns daily, monthly and yearly energy in kWh — plus what that energy is worth at your electricity price.

Your solar array
system kW = panels x watts / 1,000 · daily kWh = kW x peak sun hours x efficiency · yearly = daily x 365 · monthly = daily x 30.44

Peak sun hours are not daylight hours: 4.5 peak sun hours means a day whose total sun equals 4.5 hours at full 1,000 W/m2 intensity. Check your area with NREL PVWatts for a location-specific figure.

How the solar panel output calculator works

Three numbers drive solar output: system size in kW (panels times watts divided by 1,000), peak sun hours at your location, and system efficiency after inverter, wiring, temperature and shading losses. Daily output is simply kW times peak sun hours times efficiency — a 4 kW array at 4.5 peak sun hours and 85% efficiency makes 4 x 4.5 x 0.85 = 15.3 kWh per day.

Worked example: 16 panels of 400 W give 6.4 kW. At 4.5 peak sun hours and 85% efficiency that is 6.4 x 4.5 x 0.85 = 24.5 kWh per day, 745 kWh per month and 8,935 kWh per year. At $0.17 per kWh the yearly output is worth about $1,519 — roughly 86% of the average US home use of about 10,500 kWh per year.

Common mistakes: using daylight hours instead of peak sun hours (which overstates output), assuming 100% efficiency (real systems run 75% to 90% after losses), and sizing from a single summer month instead of the yearly average. Winter output runs well below the yearly average, so size from the yearly figure and check NREL PVWatts for your address before buying.

kW = panels x watts / 1,000 · daily kWh = kW x peak sun hours x efficiency · yearly = daily x 365

Related tools

Also try the Solar Panel Cost Calculator for installed price and payback, the How Many Solar Panels Do I Need Calculator to size from your bill, and the Three Phase Power Calculator for commercial loads.

Solar panel output calculator FAQ

How much electricity does a 400W solar panel produce per day?

At 4.5 peak sun hours and 85% efficiency, one 400 W panel makes 400 x 4.5 x 0.85 / 1,000 = 1.53 kWh per day, about 47 kWh per month and 559 kWh per year. In a sunnier spot at 5.5 peak sun hours it makes about 1.87 kWh per day.

What are peak sun hours?

Peak sun hours compress a whole day of varying sunlight into equivalent hours at full 1,000 W/m2 intensity. A day with 4.5 peak sun hours is not 4.5 hours of daylight — it is the full day total expressed in full-sun hours. The US average is roughly 4 to 5; the desert Southwest exceeds 6 and the Pacific Northwest sits near 3.5.

What system efficiency should I use?

Use 80% to 85% for a standard residential string-inverter system and 85% to 90% for micro-inverters or DC optimizers with no significant shading. The default 85% is a reasonable mid-point for a new, well-sited system.

How many panels do I need for my home?

Divide your yearly use by one panel yearly output. A home using 10,500 kWh per year, where one 400 W panel makes about 559 kWh per year, needs about 19 panels — or use the How Many Solar Panels Do I Need Calculator for the full sizing math.

Why is my real output lower than the calculator?

Shading, roof direction, tilt, temperature (panels lose output when hot), soiling and inverter clipping all reduce real output. East- or west-facing arrays typically produce 15% to 20% less than south-facing ones at the same tilt.

How do I find my peak sun hours?

Use NREL PVWatts with your address for a location-specific figure, or start from the US average of about 4.5 and adjust: sunnier regions higher, cloudier regions lower. Your installer simulation (PVSyst or Aurora) is the most precise route.

Does this calculator include battery storage?

No — it calculates panel output only. Battery sizing depends on your nightly load and desired backup days, which is a separate calculation from raw panel production.