Board and Batten Calculator
Enter your wall size, board and batten widths, and this board and batten calculator counts the boards and battens for a full wall — or spaces the battens perfectly evenly for an accent wall.
Use actual widths: a nominal 1x6 board is 5.5 inches wide, a 1x3 batten is 2.5 inches. Full-wall mode covers the wall with boards; accent mode spaces battens evenly on a flat wall.
Measure one uninterrupted wall section only — deduct doors, windows and returns first, or run each section separately.
How the board and batten calculator works
Board-and-batten has two different layouts, and mixing them up is the classic error. A full wall is covered edge to edge with boards, so boards = wall width in inches divided by board width, rounded up, and battens cover the seams: boards minus 1, plus 2 more if you run battens at both edges. An accent wall is the opposite problem: the wall stays flat and only battens are added, so the calculator picks the whole number of spaces nearest your target and back-calculates the exact gap.
Worked examples: a 12-foot by 8-foot full wall with 5.5-inch boards and edge battens needs ceil(144 / 5.5) = 27 boards and 28 battens, or 216 feet of board and 224 feet of batten. The same wall as an accent wall with 2.5-inch battens targeting 12-inch spacing gives 9 spaces and an exact clear gap of 13.22 inches, with 10 battens total.
Common mistakes: entering nominal widths instead of actual ones (a 1x6 is 5.5 inches, a 1x3 is 2.5 inches), measuring across doors and windows instead of one uninterrupted section, and forcing an exact target gap — even spacing always wins over a round target number, so let the calculator adjust the gap.
full: boards = ceil(W / board width) · battens = boards - 1 (+ 2 edges) · accent: spaces = floor((W - batten) / (batten + target)) · exact gap = (W - batten) / spaces - batten
Related tools
Finish the room with the Interior Painting Cost Calculator for the paint, or the Drywall Calculator if the wall itself still needs boarding.
Board and batten calculator FAQ
How many boards do I need for board and batten?
For a full wall, divide the wall width in inches by the actual board width and round up. A 12-foot wall with 5.5-inch boards needs 27 boards. Accent walls use battens only, so the count comes from spacing, not board coverage.
How many battens do I need?
One per seam between boards, so boards minus 1 — plus 2 more if you run battens at both outer edges. A 27-board wall needs 26 seam battens, or 28 with edge battens.
What is the standard batten spacing?
Interior accent walls usually space battens 8 to 16 inches apart on center-to-center terms, or about 12 inches of clear gap as a starting target. The calculator adjusts the target so every gap comes out exactly even.
What size boards are used for board and batten?
Interior accent walls commonly use 1x4 boards (3.5 inches actual) with 1x2 or 1x3 battens; wider 1x6 boards suit larger walls. Exterior siding traditionally uses 1x8 or 1x12 boards with 1x3 or 1x4 battens.
Should I use nominal or actual board width?
Actual, always. A 1x6 is 5.5 inches wide, a 1x4 is 3.5 inches, and a 1x3 is 2.5 inches. Using the nominal size understates the board count and leaves a shortfall at the last board.
Why does the exact spacing differ from my target?
Because battens must land on whole numbers: the calculator picks the nearest whole space count, then recomputes the gap so every space is identical. A 12-inch target on a 12-foot wall with 2.5-inch battens becomes 13.22 inches exactly.
How do I handle doors and windows?
Split the wall into uninterrupted sections and run each section separately, deducting the opening widths first. A single calculation across an opening will overstate both boards and battens.