Polymeric Sand Calculator
A 12 by 16 foot patio with narrow joints needs 3 fifty-pound bags of polymeric sand — 4 if your joints run wide or your pavers are thick. Enter your patio size, joint width, and product below for the exact bag count, the full range, and the cost.
Coverage comes from the manufacturers' data sheets: Alliance Gator Maxx G2 covers 65–85 sq ft per 50 lb bag at narrow joints and 22–42 at wide joints; Techniseal SmartSand 60–120 narrow and 25–40 wide; SEK PolySweep 50–75 narrow and 15–25 wide. The calculator uses the midpoint of the range for the headline count and shows the full range, so you can buy toward the upper figure when your pavers are thick or your joints are uneven.
Joint sand only. Polymeric sand fills the joints between pavers — it is not the bedding sand under them. Bedding is a separate 1-inch layer of concrete sand. Joints must be at least 1.5 inches deep and finished 1/8 inch below the paver surface, and the pavers must be bone dry when you sweep it in — wet pavers leave a polymer haze that does not come off. Estimates only — read your bag: the figure printed on the bag you buy always wins.
How the polymeric sand calculator works
Polymeric sand is ordered by coverage, not by weight: bags equals paved area divided by the square feet one bag covers, rounded up, with a waste allowance for uneven joints and thicker pavers. The catch is that coverage collapses as joints widen — a 50 lb bag of Alliance Gator Maxx G2 covers 65 to 85 square feet at narrow joints (1/8 to 3/8 inch) but only 22 to 42 at wide joints (3/4 to 1 1/4 inch). That is why the calculator asks for joint width before anything else: it is the single biggest driver of the count.
Worked example: a 12 by 16 ft patio is 192 square feet. With the standard 10% waste allowance that becomes 211.2 square feet, and at the midpoint of the Gator Maxx G2 narrow range — 75 sq ft per bag — that is 211.2 / 75 = 2.82, rounded up to 3 bags. The honest range is 3 to 4 bags: at the top of the coverage range (85 sq ft per bag) it is 2.5, so 3 bags; at the bottom (65 sq ft per bag) it is 3.25, so 4. Buy toward the upper figure when your pavers are thicker than 2 3/8 inches or your joints are uneven — deeper joints hold more sand.
Products differ, and the bag you buy sets the range. Techniseal SmartSand covers 60 to 120 square feet per bag at narrow joints and 25 to 40 at wide joints — a wider spread, because its joint-width band is broader. SEK PolySweep covers 50 to 75 narrow, 25 to 50 at 1/4 to 1/2 inch, and 15 to 25 at 1/2 to 3/4 inch. The calculator uses the midpoint of the published range for the headline count and prints the range, so you can see how much the answer moves before you buy.
Joint depth matters as much as width. Most polymeric sands need joints at least 1.5 inches deep and finished 1/8 inch below the paver surface — a shallow joint starves the polymer and the sand washes out. Pavers must be bone dry when you sweep it in, and every grain must be blown off the faces before you mist it: a haze of set polymer on the surface does not come off. Sweep dry, blow off, then mist — never soak.
Common mistakes: buying polymeric sand for the bedding layer — it is joint sand only, and the 1-inch bedding layer under the pavers is plain concrete sand sized with the paver base calculator; ordering by the bag count for a different product, when the coverage ranges differ by a factor of two; and skipping the waste allowance, which leaves you a bag short on a Saturday with the supplier closed. Leftover polymeric sand is your repair kit for the next five years, so one spare bag is never wasted.
bags = ceil(paved area x (1 + waste) / coverage per bag) · Gator Maxx G2: 65–85 sq ft/bag narrow, 22–42 wide · joints min 1.5 in deep, finish 1/8 in below surface
Related tools
Count the pavers first with the Paver Calculator, size the layers under them with the Paver Base Calculator, and price the bedding sand with the Paver Sand Calculator. Flagstone joints take far more sand — see the Flagstone Calculator.
Polymeric sand calculator FAQ
How many bags of polymeric sand do I need for a patio?
Divide the paved area by the coverage per bag for your joint width, then round up. A 12 by 16 ft patio (192 sq ft) with narrow joints needs 3 fifty-pound bags of Gator Maxx G2 with the 10% waste allowance — 4 if your joints run wide or your pavers are thick.
How much area does a 50 lb bag of polymeric sand cover?
It depends on joint width: 65 to 85 square feet at narrow joints (1/8 to 3/8 inch) and 22 to 42 at wide joints (3/4 to 1 1/4 inch) for Alliance Gator Maxx G2. Techniseal SmartSand runs 60 to 120 narrow and 25 to 40 wide; SEK PolySweep 50 to 75 narrow and 15 to 25 wide.
What joint width is polymeric sand for?
Most products cover joints from 1/8 inch to about 1 inch; Gator Maxx G2 goes up to 4 inches on a drainage base and 2 inches on overlays. Joints must be at least 1.5 inches deep and finished 1/8 inch below the paver surface.
Can I use polymeric sand on wet pavers?
No — the pavers must be bone dry when you sweep it in, and every grain must be blown off the faces before you mist it. Water on damp pavers leaves a polymer haze that is very hard to remove, and wet joints set weakly.
Is polymeric sand the same as bedding sand?
No. Bedding sand is a 1-inch layer of plain concrete sand under the pavers; polymeric sand is only for the joints between them. Mixing the two up is the most common ordering mistake — size the bedding layer with the paver base calculator.
How deep should polymeric sand joints be?
Full paver depth minus 1/8 inch, with a 1.5-inch minimum. A shallow joint starves the polymer and the sand washes out in the first rain; a joint filled proud of the surface leaves haze on the pavers.
How long does polymeric sand last?
Five to ten years on a properly installed patio, longer in sheltered spots. Top up joints that settle or wash out — a leftover bag from the original install is the repair kit, which is why buying one spare bag is never wasted.