Paver Patio Cost Calculator
Paver patios cost about $8–$25 per square foot installed in 2026 — roughly $2,400–$7,500 for a typical 300 sq ft patio. Enter your dimensions, paver type, and extras below for a low-to-high installed estimate.
Installed rates typically run $8–$25 per square foot. The per-square-foot rate already covers excavation, base, pavers, and labor.
Estimates only — not contractor quotes. This calculator gives approximate figures for planning. Prices vary by region, site access, and material availability; check with a qualified contractor before making decisions.
How the paver patio cost calculator works
Paver patios are priced by the square foot installed — that single rate bundles excavation, a 4–6 inch compacted gravel base, an inch of screeded bedding sand, the pavers themselves, polymeric joint sand, edge restraints, and the laying labor. Multiply by the patio area and you have the base cost.
Material choice moves the number most: concrete pavers are the workhorse ($8–$15), clay brick costs more for its classic look ($10–$20), and natural stone like flagstone or travertine tops the range ($15–$25+). Pattern complexity adds labor too — a herringbone layout cuts more pavers and takes longer than a simple running bond.
cost = L × W × rate · low = area × low rate, high = area × high rate · extras added flat
Related tools
Keep exploring: Paver Calculator for paver counts and base material, or the Concrete Slab Calculator to compare a poured slab against pavers.
Paver patio cost calculator FAQ
How much does a paver patio cost per square foot?
About $8–$25 per square foot installed in 2026. Concrete pavers run $8–$15, clay brick pavers $10–$20, and natural stone $15–$25 or more — all including base prep, pavers, and labor.
How much does a 300 sq ft paver patio cost?
Roughly $2,400–$7,500 installed. Concrete pavers land near $2,400–$4,500 for that size, while natural stone can reach $4,500–$7,500. Demolition of an old surface or extras like a seating wall add to the total.
Are pavers cheaper than a concrete slab patio?
No — pavers cost more upfront. A poured concrete slab runs about $4–$12 per square foot installed versus $8–$25 for pavers. Pavers win on repairability: cracked sections lift out and swap individually instead of replacing the whole slab.
How long do paver patios last?
25–50 years with a properly compacted 4–6 inch gravel base. Pavers themselves rarely wear out; failures come from base settlement. Individual pavers can be lifted and re-leveled without tearing up the patio.
Can I install a paver patio myself?
Yes for small, simple patios — DIY saves roughly 40–60% of the installed cost. The base prep (excavation, compacted gravel, screeded sand) is about 70% of the work and where most DIY patios fail; get the base right and the laying is straightforward.
How do I stop weeds from growing between pavers?
Sweep polymeric sand into the joints — it hardens when wetted and blocks weed roots — plus install edge restraints so joints stay tight. Re-sand every 3–5 years as the joint sand washes out.
Does a paver patio add home value?
Yes — patios typically return 50–70% of their cost at resale through curb appeal and usable outdoor living space. They appraise better than plain concrete and photograph better for listings.