Vinyl Siding Cost Calculator
Vinyl siding costs about $3–$12 per square foot of wall area installed in 2026 — roughly $6,000–$15,000 for a typical 2,000 sq ft home. Pick a mode below and get a low-to-high estimate for your project.
Wall area is estimated as home size × 1.15 for a two-story footprint. Single-story ranches run closer to × 1.0.
Installed rates typically run $3–$12 per sq ft of wall area. The rate already covers panels, labor, house wrap, and standard trim.
Estimates only — not contractor quotes. This calculator gives approximate figures for planning. Prices vary by region, labor, and home complexity; get local quotes before committing.
How the vinyl siding cost calculator works
Vinyl siding is priced by the square foot of wall area installed. That single rate bundles the panels, house wrap, J-channel and corner trim, fasteners, and the crew's labor. Multiply your wall area by the rate for your chosen grade and you have the base cost.
Grades are the biggest cost lever. Builder-grade panels (.040" thick) are the cheapest but fade faster; mid-grade (.044"–.046") is the sweet spot most contractors install; premium and insulated vinyl (.050"+ with foam backing) costs the most but adds R-value and dent resistance. Two cost adders sit on top: tearing off old siding ($1–$2 per sq ft) and full trim, soffit, and fascia replacement ($1,500–$3,000 flat).
cost = wall area × grade rate · low = cost × 0.9, high = cost × 1.1 · wall area ≈ home sq ft × 1.15
Related tools
Keep exploring: Paint Calculator for the cost of painting instead of siding, or the Metal Siding Cost Calculator to compare vinyl against a longer-lasting metal option.
Vinyl siding cost calculator FAQ
How much does vinyl siding cost per square foot?
Vinyl siding costs about $3–$12 per square foot of wall area installed in 2026. Builder-grade panels run $3–$5, mid-grade $5–$8, and premium or insulated vinyl $8–$12. The rate covers materials, labor, and standard trim.
How much does it cost to side a 2,000 sq ft house?
Siding a 2,000 sq ft home typically costs $6,000–$15,000 installed. A 2,000 sq ft house has roughly 1,800–2,300 sq ft of wall area depending on stories and layout, so mid-grade vinyl lands near $9,000–$12,000 before extras like old-siding removal.
How long does vinyl siding last?
Quality vinyl siding lasts 25–40 years with minimal maintenance. Premium and insulated panels carry the longest warranties — often lifetime limited — while thin builder-grade panels may fade or crack after 20 years in harsh sun.
Is vinyl siding cheaper than fiber cement?
Yes — vinyl costs roughly half as much as fiber cement installed. Fiber cement (Hardie board) runs $7–$15 per square foot installed, while vinyl runs $3–$12. Fiber cement lasts longer and resists fire better, which is why some homeowners pay the premium.
Can I install vinyl siding myself?
A handy DIYer can install vinyl on a simple single-story wall, and materials alone cost $1–$3 per square foot. But multi-story homes, old-siding removal, and trim work are best left to pros — poor installation voids warranties and lets water behind the panels.
Does new siding increase home value?
Yes. Industry remodeling data consistently shows vinyl siding replacement returning roughly 80–95% of its cost in resale value, among the highest returns of any exterior project, plus it cuts painting maintenance to nearly zero.
What maintenance does vinyl siding need?
Very little — an annual wash with a garden hose or low-pressure washer keeps it clean. Avoid high-pressure washing, which can force water behind panels. Inspect caulk around windows and doors every few years.